Selected Phoenics Publications

The following list of Phoenics publications can be downloaded with abstracts and keywords in the following button link:

Phoenics Publications List with abstracts

At the end of this page, there is another list of PHOENICS publications in other journals to be downloaded.

Sugawara, M., Komatsu, Y., Beer, H.
Melting of ice stuck on cylinders placed horizontally in a water flowing duct
(2015) Heat and Mass Transfer/Waerme- und Stoffuebertragung, 8 p. Article in Press. 

Jia, J.-F., He, W.
Effect of ventilation tube diameter on thermal performance of food refrigerated warehouse floor antifreezing mechanical ventilation system
(2015) Advance Journal of Food Science and Technology, 7 (5), pp. 320-325. 

Kudariyawar, J.Y., Vaidya, A.M., Maheshwari, N.K., Satyamurthy, P., Srivastava, A.K.
Estimating steady state and transient characteristics of molten salt natural circulation loop using CFD
(2015) Kerntechnik, 80 (1), pp. 20-31. 

Hata, K., Takeuchi, Y., Hama, K., Shiotsu, M.
Natural convection heat transfer from horizontal rod bundles in liquid sodium. Part 2: Correlations for horizontal rod bundles based on theoretical results
(2015) Journal of Nuclear Science and Technology, 52 (3), pp. 342-354. 

Zhang, Y.-H., Zhao, Q., Huang, Z.-A., Zhang, Y.-F., Tian, Y., Gao, Y.-K.
Numerical simulating research on changing law of humidity in refuge chamber
(2014) Progress in Mine Safety Science and Engineering II - Proceedings of the 2nd International Symposium of Mine Safety Science and Engineering, pp. 815-819. 

Doulati Ardejani, F., Jannesar Malakooti, S., Ziaedin Shafaei, S., Shahhosseini, M.
A Numerical Multi-Component Reactive Model for Pyrite Oxidation and Pollutant Transportation in a Pyritic, Carbonate-Rich Coal Waste Pile in Northern Iran [Ein numerisches Multikomponentenmodell für die Simulation von Pyritoxydation und Schadstofftransport in Pyrit- und Karbonatreichen Kohlebergen im Nordiran]
(2014) Mine Water and the Environment, 33 (2), pp. 121-132. 

Vittorio Messa, G., Malavasi, S.
Computational investigation of liquid-solid slurry flow through an expansion in a rectangular duct
(2014) Journal of Hydrology and Hydromechanics, 62 (3), pp. 234-244. 

Shabani, K.S., Ardejani, F.D., Gharaei, A.A., Badii, K.
Modeling of ions biological adsorption by phanerochaete Chrysosporium fungus from acid mine drainage
(2014) Advances in Environmental Biology, 8 (1), pp. 25-30. 

Ibraimo, M., Annegarn, H.J., Pemberton-Pigott, C.
Modelling of bottom-lit down-draft (BLDD) clean-burning coal stove
(2014) Proceedings of the 22nd Conference on the Domestic Use of Energy, DUE 2014, art. no. 6827754, . 

Agranat, V.M., Zhubrin, S.V., Pioro, I.
MULTI-group two-phase flow model of drift drop plume
(2014) International Conference on Nuclear Engineering, Proceedings, ICONE, 4, . 

Zhou, X.P., Yan, C.W., Li, W.
Numerical research on indoor wind environment of green building
(2014) Applied Mechanics and Materials, 587-589, pp. 468-475. 

Miao, Y., Chiou, S.-C.
Numerical simulation and design strategy for wind environments: A case study of the typical Southern Fujian village
(2014) Innovation, Communication and Engineering - Proceedings of the 2nd International Conference on Innovation, Communication and Engineering, ICICE 2013, pp. 451-454. 

Han, Y., Chai, B.-H., Zhou, W., Wei, G.-R., Bi, K.-M., Long, Y.-Y., Feng, B.
Numerical simulation of potassium heat pipe based on porous medium model
(2014) Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 48 (1), pp. 49-53. 

Hara, H., Hashimoto, M., Yamashita, H.
Preoperative planning of upper airway surgery with DICOM viewer
(2014) Oto-Rhino-Laryngology Tokyo, 56 (5), pp. 308-310. 

Jimenez, B., Rimpl, D., Moennich, K.
Validation and comparison of wind resource models in highly complex terrain
(2014) European Wind Energy Association Conference and Exhibition 2014, EWEA 2014, . 

Jia, J.-F., He, W.
Effect of thickness of heat insulating material in bulkhead on cabin temperature of reefer ship for agricultural products
(2013) Journal of Chemical and Pharmaceutical Research, 5 (11), pp. 403-408. 

Wu, J., Wang, X., Ma, Z.
A comparative study of N2 and SF6 arcing process for 252kV puffer circuit breaker based on a novel simulation model
(2013) IEEE Region 10 Annual International Conference, Proceedings/TENCON, art. no. 6718943, . 

Naphade, P., Borgohain, A., Raj, R.T.K., Maheshwari, N.K.
Experimental and CFD study on natural circulation phenomenon in lead bismuth eutectic loop
(2013) Procedia Engineering, 64, pp. 936-945. 

Sinha, A.K., Piccone, T.J., Miller, P.D.
Mathematical modeling of draining of dual-strand caster tundish with unequal throughputs at united states steel corporation
(2013) ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 3, art. no. V003T21A007, . 

Liu, J., Pei, Q.-Q.
Numerical simulation and experiment study of indoors thermal environment in summer air-conditioned room
(2013) Procedia Engineering, 52, pp. 230-235. 

Dong, W.-L., Liang, D.
Simulation of the atrium fire smoke flow and research about control studies
(2013) Procedia Engineering, 52, pp. 92-96. 

Miao, Y., Chiou, S.-C.
Study on the wind environment of the architecture communities: Traditional typical min nan human settlements' case
(2013) Mathematical Problems in Engineering, 2013, art. no. 467076, . 

He, W., Jia, J.-F.
Effect of ventilation tube spacing on refrigerated warehouse floor antifreezing mechanical ventilation system
(2013) Journal of Chemical and Pharmaceutical Research, 5 (10), pp. 363-368. 

Basok, B.I., Belyaeva, T.G., Kuzhel', L.N., Khibina, M.A.
Simulation of the Heat Accumulation and Extraction Processes in the Heat Exchanger-Ground System
(2013) Journal of Engineering Physics and Thermophysics, pp. 1-9. Article in Press. 

Chen, S.L., Lu, J., Yu, W.W., Zhang, S.L.
A simple three-dimensional terrain modeling method for complex terrain wind environment simulation
(2013) Applied Mechanics and Materials, 397-400, pp. 2420-2425. 

Li, Y.J., Yang, Y.A.
Influence of Workstation screen for indoor mechanical ventilation
(2013) Applied Mechanics and Materials, 405-408, pp. 2959-2963. 

Rameshwaran, P., Naden, P., Wilson, C.A.M.E., Malki, R., Shukla, D.R., Shiono, K.
Inter-comparison and validation of computational fluid dynamics codes in two-stage meandering channel flows
(2013) Applied Mathematical Modelling, 37 (20-21), pp. 8652-8672. 

Basok, B.I., Belyaeva, T.G., Kuzhel, L.N., Khibina, M.A.
Simulation of the heat accumulation and extraction processes in the heat exchanger-ground system
(2013) Journal of Engineering Physics and Thermophysics, 86 (6), pp. 1355-1363. 

Dong, J.N., Su, X., Chen, T., Wang, M., Li, X.X.
Numerical optimization of oilfield heating furnace research
(2013) Advanced Materials Research, 805-806, pp. 1874-1877. 

Zhou, C.H., Zeng, Y.M.
Optimization research on ventilation modes of anatomy laboratory
(2013) Applied Mechanics and Materials, 353-354, pp. 3044-3048. 

Hata, K., Shirai, Y., Masuzaki, S., Hamura, A.
Computational study of twisted-tape-induced swirl flow heat transfer and pressure drop in a vertical circular tube under velocities controlled
(2013) Nuclear Engineering and Design, 263, pp. 443-455. 

Chiang, W.H., Hsu, H.H., Huang, J.S.
Façade design effect on cross-ventilation in taiwanese school buildings
(2013) Journal of Green Building, 8 (2), pp. 90-111. 

Maher, D., Ghazi, B., Jamel, C.
A two time scales turbulence model of turbulent bubbly flowsy
(2013) International Journal of Fluid Mechanics Research, 40 (3), pp. 185-203. 

Plasmans, J., Donnat, L., de Carvalho, E., Debelle, T., Marechal, B., Baillou, F.
Challenges with the use of CFD for major accident dispersion modeling
(2013) Process Safety Progress, 32 (2), pp. 207-211. 

Wang, J.-J., Gao, Y.-K., Tong, X.-L., Liu, P.-P.
Temperature changing regulation in coalmine refuge chamber
(2013) Dongbei Daxue Xuebao/Journal of Northeastern University, 34 (SUPPL.1), pp. 15-19. 

Agah, A., Doulati Ardejani, F., Ghoreishi, H.
Two-dimensional numerical finite volume modeling of processes controlling distribution and natural attenuation of BTX in the saturated zone of a simulated semi-confined aquifer
(2013) Arabian Journal of Geosciences, 6 (6), pp. 1933-1944. 

Tang, H., Mao, Y., Ma, L., Guo, Z.
CFD model development for gaseous reduction of iron ore fines using multilayer moving-fluidized bed
(2013) TMS Annual Meeting, pp. 401-409. 

Lin, C.-S., Yu, C.-C., Te-Chi, C., Wang, S.-C., Chian-Yu, P.
Safety verification of mechanical properties of reinforced concrete beam in the fire by applying CFD
(2013) Advanced Materials Research, 647, pp. 802-808. 

Lin, C.-S., Chen, T.-C., Yu, C.-C., Wang, S.-C.
Simulation and analysis on mechanical strength of reinforced concrete beam undergoing a fire
(2013) Advanced Materials Research, 647, pp. 809-813. 

Tang, H.-Q., Zhao, Z.-L., Guo, Z.-C.
Numerical simulation of iron ore fines reduction using COREX gas in Z-path moving-fluidized bed
(2013) Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 35 (2), pp. 169-176. 

Yu, C.-C., Wang, S.-C., Lin, C.-S., Chen, T.C.
CFD application for performance based safety verification of reinforced concrete beam in computer simulation building fire
(2013) Advanced Materials Research, 601, pp. 190-195. 

Sengupta, S., Vijayan, P.K., Sasidharan, K., Raina, V.K.
A numerical study of flow and mixing characteristics inside the chimney structure of a pool type research reactor
(2013) Annals of Nuclear Energy, 51, pp. 167-180. 

Castellani, F., Vignaroli, A.
An application of the actuator disc model for wind turbine wakes calculations
(2013) Applied Energy, 101, pp. 432-440. 

Gómez, E.R., Zenit, R., Rivera, C.G., Trápaga, G., Ramírez-Argáez, M.A.
Mathematical modeling of fluid flow in a water physical model of an aluminum degassing ladle equipped with an impeller-injector
(2013) Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 44 (2), pp. 423-435. 

Malateaux, E.C., Milanez, L.F.
Numerical analysis of the thermal dissipation in horizontal isothermal eccentrically insulated cylinders by free convection
(2013) ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8 A, . 

Sinnasamy, Y., Arbiahyahaya, N., Basri, S., Jafar, A.A., Rafie, A.S.M.
Assessment on effects of under-relaxation factors on 2d incompressible laminar flow over a backward-facing step (BFS)
(2012) Applied Mechanics and Materials, 225, pp. 55-59. 

Ramos-Gómez, E., González-Rivera, C., Ramírez-Argáez, M.A.
Mathematical modeling of fluid flow in aluminum ladles for degasification with impeller - Injector
(2012) AIP Conference Proceedings, 1479 (1), pp. 173-176. 

Dogan, A., Akkus, S., Baskaya, Ş.
Numerical analysis of natural convection heat transfer from annular fins on a horizontal cylinder
(2012) Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, 32 (2), pp. 31-41. 

Sinnasamy, Y., Yahaya, N.A., Jaafar, A.A., Rafie, A.S.M.
Study on formation of main recirculation region over a backward-facing step flow at moderate range of Reynolds numbers
(2012) Defence S and T Technical Bulletin, 5 (2), pp. 135-148. 

Da Chou, K., Lin, C.S., Yu, C.C., Wang, S.C.
Ultimate strength analysis for a concrete beam after a sustained building fire
(2012) Advanced Materials Research, 566, pp. 331-335. 

Kotcioglu, I., Nasiri Khallaji, M., Uǧurlu, A.
Numerical analysis in a rectangular duct heat exchanger with heat sink plate-fins using CFD
(2012) 6th International Conference on Thermal Engineering Theory and Applications, . 

Bo-Ot, L.M., Wang, Y.-H., Chiang, C-M., Lai, C.-M.
Effects of a green space layout on the outdoor thermal environment at the neighborhood level
(2012) Energies, 5 (10), pp. 3723-3735. 

Uzuegbunam, F.O., Chukwuali, C.B., Mba, H.C.
Evaluation of the effectiveness of design strategies for passive ventilation in hot-humid tropical environment: A case study of the design strategies used in student hostels of university of Nigeria, enugu campus
(2012) JP Journal of Heat and Mass Transfer, 6 (3), pp. 236-275. 

Ghozlani, B., Hafsia, Z., Maalel, K.
Numerical study of flow around an oscillating diamond prism and circular cylinder at low Keulegan-Carpenter number
(2012) Journal of Hydrodynamics, 24 (5), pp. 767-775. 

Tang, H.-Q., Mao, Y., Guo, Z.-C., Ye, S.-F.
Simulation on reformed COG reduction of iron ore fines in Z-path moving-fluidized bed
(2012) Journal of Iron and Steel Research, 24 (10), pp. 20-25. 

Doulati Ardejani, F., Badii, K., Farhadi, F., Aziz Saberi, M., Jodeiri Shokri, B.
A Computational Fluid Dynamic Model for Prediction of Organic Dyes Adsorption from Aqueous Solutions
(2012) Environmental Modeling and Assessment, 17 (5), pp. 505-513. 

Tang, H., Guo, Z., Kitagawa, K.
Simulation study on performance of Z-path moving-fluidized bed for gaseous reduction of iron ore fines
(2012) ISIJ International, 52 (7), pp. 1241-1249. 

Hata, K., Shirai, Y., Masuzaki, S., Hamura, A.
Computational study of turbulent heat transfer for heating of water in a short vertical tube under velocities controlled
(2012) Nuclear Engineering and Design, 249, pp. 304-317. 

Zamora, B., Kaiser, A.S.
Numerical simulation of turbulent air flow with dispersed droplets in cooling tower eliminators [Simulación numérica del flujo turbulento de aire con gotas dispersas de agua a través de separadores de torres de refrigeración]
(2012) Revista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieria, 28 (3), pp. 148-160. 

Stephens, D., Tabib, M., Schwarz, M.P., Davis, M.
CFD simulation of bath dynamics in the HIsmelt smelt reduction vessel for iron production
(2012) Progress in Computational Fluid Dynamics, 12 (2-3), pp. 196-206. 

Ramechecandane, S., Gravdahl, A.
Numerical investigations on wind flow over complex terrain
(2012) Wind Engineering, 36 (3), pp. 273-296. 

Alamgholilou, A., Esmaeilzadeh, E.
Numerical investigation on effects of secondary flowinto duct for cooling of the ribs by passive enhancementmethod
(2012) Journal of Enhanced Heat Transfer, 19 (3), pp. 233-248. 

Crowther, J.M., Dandy, G.C.
Model comparisons for tracer experiments at a clear water storage tank
(2012) Australian Journal of Water Resources, 15 (2), pp. 145-156. 

Mishra, S.K., Jha, P.K., Sharma, S.C., Ajmani, S.K.
Effect of blockage of outlet nozzle on fluid flow and heat transfer in continuously cast multistrand billet caster tundish
(2012) Canadian Metallurgical Quarterly, 51 (2), pp. 170-183. 

Kumar, V., Wee, A.P., Birla, S., Subbiah, J., Thippareddi, H.
A 3-D computational fluid dynamics model for forced air cooling of eggs placed in trays
(2012) Journal of Food Engineering, 108 (3), pp. 480-492. 

Qin, C., Zhao, L.
The energy saving effect of natural ventilation for residential building in Guangzhou
(2012) Applied Mechanics and Materials, 121-126, pp. 597-601. 

Zhou, C., Xue, N.
The study of vent form of double-skin facade based on CFD
(2012) Advanced Materials Research, 374-377, pp. 440-444. 

Smida, K., Lamloumi, H., Hafsia, Z., Maalel, K.
CFD analysis of water solitary wave reflection
(2011) Journal of Engineering Research, 8 (2), pp. 10-18. 

Oliveira, M., Labaki, L., Vatavuk, P.
Design alterations in urban self-built houses in Campinas, Brazil: Analysis of their effects on ventilation through CFD
(2011) PLEA 2011 - Architecture and Sustainable Development, Conference Proceedings of the 27th International Conference on Passive and Low Energy Architecture, pp. 189-194. 

Kozarev, N., Ilieva, N.
Gas pollutant dispersion in the atmosphere at particular meteorological conditions
(2011) Journal of the University of Chemical Technology and Metallurgy, 46 (1), pp. 61-66. 

Seifpanahi Shabani, K., Doulati Aredejani, F., Singh, R.N., Marandi, R., Soleimanyfar, H.
Numerical modeling of CU 2+ and MN 2+ ions biosorption by aspergillus niger fungal biomass in a continuous reactor
(2011) Archives of Mining Sciences, 56 (3), pp. 461-476. 

Wu, J., Wang, X., Ma, Z., Rong, M., Yan, J.
Numerical simulation of gas flow during arcing process for 252 kv puffer circuit breakers
(2011) Plasma Science and Technology, 13 (6), pp. 730-734. 

Kozarev, N., Ilieva, N.
Plume rise in particular meteorological conditions
(2011) Journal of the University of Chemical Technology and Metallurgy, 46 (3), pp. 305-308. 

Chakrabarty, A., Edel, M., Raibagkar, A., Aloqaily, A.
Thermal hazard evaluation for process buildings using CFD analysis techniques
(2011) AIChE Annual Meeting, Conference Proceedings, 29 p. 

Januževiciene, I., Venckus, Z.
The numerical modeling of nitrogen oxides and coal monoxide in the atmosphere, when applying phoenics programme [Azoto oksidu ir anglies monoksido sklaidos atmosferoje skaitinis modeliavimas pagal phoenics programa]
(2011) Journal of Environmental Engineering and Landscape Management, 19 (3), pp. 225-233. 

Panagopoulos, I.K., Karayannis, A.N., Kassomenos, P., Aravossis, K.
A CFD simulation study of VOC and formaldehyde indoor air pollution dispersion in an apartment as part of an indoor pollution management plan
(2011) Aerosol and Air Quality Research, 11 (6), pp. 758-762. 

Ma, L., Zou, H., Zhu, J.
Study on prediction and assessment methods of outdoor wind environment of residential district - Taking "letian home" in Leshan, Sichuan for example
(2011) Applied Mechanics and Materials, 71-78, pp. 3868-3873. 

Sapra, M.K., Bajaj, M., Kundu, S.N., Sharma, B.S.V.G.
Experimental and CFD investigation of 100 mm size cone flow elements
(2011) Flow Measurement and Instrumentation, 22 (5), pp. 469-474. 

Mishra, S.K., Jha, P.K., Sharma, S.C., Ajmani, S.K.
Numerical investigation of the effect of transitory strand opening on mixing in a multistrand tundish
(2011) International Journal of Minerals, Metallurgy and Materials, 18 (5), pp. 535-542. 

Basok, B.I., Rezakova, T.A.
Propagation dynamics of a liquid injected into an aquifer
(2011) Journal of Engineering Physics and Thermophysics, 84 (6), pp. 1353-1359. 

López-González, J., Silva-Casarín, R., Mendoza-Baldwin, E.G.
The use of energy from currents with an impulse hydro-generator [Aprovechamiento de la energia de las correientes con el hidrogenderador impulsa]
(2011) Tecnologia y Ciencias del Agua, 2 (4), pp. 97-110. 

Jia, J., He, W.
Simulation study on heat insulating material used in refrigerated cargo hold shipboard of fishing vessel
(2011) Advanced Materials Research, 311-313, pp. 1953-1956. 

Xie, D., Zhang, W.-L.
The effect of natural wind to the atrium building smoke migration
(2011) Procedia Engineering, 11, pp. 560-565. 

Zhao, H., Wang, X., Ma, Z., Rong, M., Li, Y.
Simulation of breaking characteristics of a 550 kV single-break tank circuit breaker
(2011) IEICE Transactions on Electronics, E94-C (9), pp. 1402-1408. 

Lorenz, M., Biollay, H.
Backlayering stratification parameters
(2011) BHR Group - 14th International Symposium on Aerodynamics and Ventilation of Tunnels, pp. 363-371. 

Kwan, S., Vasquez, J.A., Millar, R.G., Steffler, P.M.
A fast method for 3D CFD modeling of a long river reach
(2011) World Environmental and Water Resources Congress 2011: Bearing Knowledge for Sustainability - Proceedings of the 2011 World Environmental and Water Resources Congress, pp. 2095-2103. 

Sharan, G., Clus, O., Singh, S., Muselli, M., Beysens, D.
A very large dew and rain ridge collector in the Kutch area (Gujarat, India)
(2011) Journal of Hydrology, 405 (1-2), pp. 171-181. 

Çalişkan, S., Altunok, T., Başkaya, S., Güngüneş, H.M.
Numerical analysis of a commercial display cabinet with air curtain [Hava perdeli• bi•r ti•cari• soǧutma kabi•ni•ni•n sayisal anali•zi•]
(2011) Journal of the Faculty of Engineering and Architecture of Gazi University, 26 (2), pp. 415-425. 

Zhang, R., Cai, Z., Pan, J.
Numerical simulation of the molten pool character in high power fiber laser welding
(2011) China Welding (English Edition), 20 (2), pp. 22-26. 

Mohamed, A.M.I., Hoettiba, R., Saif, A.M.
The effect of the corrugation rib angle of attack on the fluid flow and heat transfer characteristics inside corrugated ribbed passage
(2011) Journal of Heat Transfer, 133 (8), art. no. 081901, . 

Kumar, M., Borghain, A., Maheshwari, N.K., Vijayan, P.K.
Simulation of natural circulation in a rectangular loop using CFD code PHOENICS
(2011) Kerntechnik, 76 (2), pp. 93-97. 

Nguyen, A.T., Reiter, S.
The effect of ceiling configurations on indoor air motion and ventilation flow rates
(2011) Building and Environment, 46 (5), pp. 1211-1222. 

Chiang, W.-H., Hsu, H.-H., Huang, J.-S.
Fenestration effects on cross ventilation for a typical Taiwanese school building when applying wind profile
(2011) World Academy of Science, Engineering and Technology, 76, pp. 589-594. 

Fintikakis, N., Gaitani, N., Santamouris, M., Assimakopoulos, M., Assimakopoulos, D.N., Fintikaki, M., Albanis, G., Papadimitriou, K., Chryssochoides, E., Katopodi, K., Doumas, P.
Bioclimatic design of open public spaces in the historic centre of Tirana, Albania
(2011) Sustainable Cities and Society, 1 (1), pp. 54-62. 

Hourri, A., Angers, B., Bénard, P., Tchouvelev, A., Agranat, V.
Numerical investigation of the flammable extent of semi-confined hydrogen and methane jets
(2011) International Journal of Hydrogen Energy, 36 (3), pp. 2567-2572. 

Stevanović, Z.Z., Živković, M., Mirkov, N.
CFD modelling of fire protection system in office building
(2011) Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, pp. 1987-1997. 

Streckiene, G., Martinaitis, V., Vaitiekunas, P.
Simulation of thermal stratification in the heat storage for CHP plant
(2011) 8th International Conference on Environmental Engineering, ICEE 2011, pp. 812-819. 

Yan, J.D., Pei, Y., Fang, M.T.C.
The development of an object based simulation tool for switching arcs
(2011) 19th Symposium on Physics of Switching Arc 2011, FSO 2011, pp. 77-86. 

Zhang, R.-H., Pan, J.-L., Katayama, S.
The mechanism of penetration increase in A-TIG welding
(2011) Frontiers of Materials Science, 5 (2), pp. 109-118. 

Chakrabarty, A., Edel, M., Raibagkar, A., Aloqaily, A.
Thermal hazard evaluation for process buildings using CFD analysis techniques
(2011) 11AIChE - 2011 AIChE Spring Meeting and 7th Global Congress on Process Safety, Conference Proceedings, 29 p. 

Chakrabarty, A., Aloqaily, A.
Using CFD to assist facilities comply with thermal hazard regulations such as new API RP-752 recommendations
(2011) Institution of Chemical Engineers Symposium Series, (156), pp. 205-212. 

Nagai, N., Ito, T., Nishijiri, N.
Visualization and numerical simulation of two-phase flow between electrodes on alkaline water electrolysis
(2010) Journal of Flow Visualization and Image Processing, 17 (2), pp. 99-112. 

Xenidou, T.C., Prud'Homme, N., Vahlas, C., Markatos, N.C., Boudouvis, A.G.
Reaction and transport interplay in Al MOCVD investigated through experiments and computational fluid dynamic analysis
(2010) Journal of the Electrochemical Society, 157 (12), pp. D633-D641. 

Velusamy, K., Raviprasan, G.R., Nema, V., Meikandamurthy, C., Selvaraj, P., Chellapandi, P., Vaidyanathan, G., Chetal, S.C.
Computational fluid dynamic investigations and experimental validation of frozen seal sodium valve assembly of a fast reactor
(2010) Annals of Nuclear Energy, 37 (11), pp. 1423-1434. 

Adoua, R., Mietton-Peuchot, M., Milisic, V.
Modelling of oxygen transfer in wines
(2010) Chemical Engineering Science, 65 (20), pp. 5455-5463. 

Vasarevičius, S., Mineikaite, A., Vaitiekunas, P.
Investigation into heavy metals in storm wastewater from vilnius žirmūnai district and pollutantits spread model in neris river
(2010) Journal of Environmental Engineering and Landscape Management, 18 (3), pp. 242-249. 

Arafat, A., Chakrabarty, A.
Jet flame length and thermal radiation: Evaluation with CFD simulations
(2010) 10AIChE - 2010 AIChE Spring Meeting and 6th Global Congress on Process Safety, 25 p. 

Aloqaily, A., Chakrabarty, A.
Jet flame length and thermal radiation: Evaluation with CFD simulations
(2010) AIChE Annual Meeting, Conference Proceedings, . 

Vaidya, A.M., Borgohain, A., Maheshwari, N.K., Govindan, D., Vijayan, P.K.
Numerical investigation of heat transfer in the vertical annulus between pressure tube and calandria tube of the advanced water cooled reactor
(2010) Kerntechnik, 75 (4), pp. 164-169. 

Sazhin, S.S., Krutitskii, P.A., Gusev, I.G., Heikal, M.R.
Transient heating of an evaporating droplet
(2010) International Journal of Heat and Mass Transfer, 53 (13-14), pp. 2826-2836. 

Chai, B.-H., Du, K.-W., Wei, G.-R., Wei, G.-F., Feng, B., Bi, K.-M.
Steady numerical analysis of potassium heat pipe
(2010) Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 44 (5), pp. 553-557. 

Cheng, M., An, Y., Du, H., Wei, Y., Fan, D.
Effect of current changes on velocity and temperature profiles of GTAW arc
(2010) Hanjie Xuebao/Transactions of the China Welding Institution, 31 (4), pp. 33-37. 

Vaidya, A.M., Maheshwari, N.K., Vijayan, P.K.
Estimation of fuel and clad temperature of a research reactor during dry period of de-fuelling operation
(2010) Nuclear Engineering and Design, 240 (4), pp. 842-849. 

Zamora, B., Kaisera, A.S., Vicenteb, P.G.
Improvement in learning on fl uid mechanics and heat transfer courses using computational fl uid dynamics
(2010) International Journal of Mechanical Engineering Education, 38 (2), pp. 147-166. 

Gamiño, B., Aguillón, J.
Numerical simulation of syngas combustion with a multi-spark ignition system in a diesel engine adapted to work at the Otto cycle
(2010) Fuel, 89 (3), pp. 581-591. 

Ardejani, F.D., Shokri, B.J., Bagheri, M., Soleimani, E.
Investigation of pyrite oxidation and acid mine drainage characterization associated with Razi active coal mine and coal washing waste dumps in the Azad shahr-Ramian region, northeast Iran
(2010) Environmental Earth Sciences, 61 (8), pp. 1547-1560. 

Wang, C., Jia, X., Zhao, H., Hao, M.
Numerical simulation of liquid-solid coaxial annular flow
(2010) Drilling Fluid and Completion Fluid, 27 (1), pp. 21-23. 

Wang, Z.-M., Zhao, Y.-B., Zhang, C.-X., Deng, M., Zhang, D.-H.
RETRACTED ARTICLE: Simulation of flow through vibrating screens with moving body method
(2010) ICCASM 2010 - 2010 International Conference on Computer Application and System Modeling, Proceedings, 8, art. no. 5619183, pp. V840-V844. 

Clus, O., Ouazzani, J., Muselli, M., Nikolayev, V.S., Sharan, G., Beysens, D.
Comparison of various radiation-cooled dew condensers using computational fluid dynamics
(2009) Desalination, 249 (2), pp. 707-712. 

Xenidou, T.C., Prud'homme, N., Vahlas, C., Markatos, N.C., Boudouvis, A.G.
A comprehensive insight in the MOCVD of aluminum through interaction between reactive transport modeling and targeted growth experiments
(2009) ECS Transactions, 25 (8 PART 1), pp. 99-106. 

Sweitzer, G.
Building ventilation simulation: Analog or digital tools?
(2009) 9th International Conference and Exhibition - Healthy Buildings 2009, HB 2009, . 

Machado, R.B.P., Do Nascimento, J.T., Do Fundo, F.S., De Souza, V.C.
CFD modeling of fire spread in an offshore platform
(2009) AIChE Annual Meeting, Conference Proceedings, . 

Dogan, A., Baysal, S., Baskaya, S.
Numerical analysis of natural convection heat transfer from partially open cavities heated at one wall
(2009) Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, 29 (1), pp. 79-90. 

Liu, H., Xin, N., Cao, Q., Sha, L., Sun, D., Wu, S.
Numerical simulation of the influence of over fire air position on the combustion in a single furnace boiler with dual circle firing
(2009) Korean Journal of Chemical Engineering, 26 (4), pp. 1137-1143. 

Duarte, F.E.S., Delgaudio, C.V.P., David, F.N., Waltz, F., Souza, V.C.
Steps for a multidisciplinary engineering competition
(2009) Computer Aided Chemical Engineering, 27 (C), pp. 2145-2149. 

Shu, C., Wei, X.
The numerical simulation of air helical flow outside of upright tube
(2009) IFCSTA 2009 Proceedings - 2009 International Forum on Computer Science-Technology and Applications, 2, art. no. 5384634, pp. 355-358. 

Oliveira, M.C.A., Labaki, L.C., Vatavuk, P.
The use of CFD applied to studies of ventilation in urban areas in Campinas, Brazil
(2009) IBPSA 2009 - International Building Performance Simulation Association 2009, pp. 1930-1934. 

Roedig, M.-K., Klose, W.
Modelling of coal pyrolysis using a twin screw reactor
(2009) Revue de Metallurgie. Cahiers D'Informations Techniques, 106 (10), pp. 404-409. 

Aryafar, A., Ardejani, F.D.
The study of oxygen diffusion process in metallic waste dump: Analytical and Numerical Modeling
(2009) International Journal of Applied Environmental Sciences, 4 (3), pp. 287-294. 

Güldaş, A., Uluer, O., Özdemir, A.
The numerical analysis of a mold cavity filling using the finite control volume method and comparison to the experimental results
(2009) Polymer - Plastics Technology and Engineering, 48 (4), pp. 389-396. 

Truchot, B., Boehm, M., Waymel, F.
Numerical analysis of smoke layer stability
(2009) 13th International Symposium on Aerodynamics and Ventilation of Vehicle Tunnels, 1, pp. 281-295. 

Hafsia, Z., Hadj, M.B., Lamloumi, H., Maalel, K.
Internal inlet for wave generation and absorption treatment
(2009) Coastal Engineering, 56 (9), pp. 951-959. 

Sha, L., Liu, H., Jiao, F., Cao, Q., Xin, N., Wu, S.
The research of the influence of primary air ratio on the combustion in a lignite-fired Ultra Supercritical boiler
(2009) Asia-Pacific Power and Energy Engineering Conference, APPEEC, art. no. 4918904, . 

Zujus, R., Makarevičius, R., Poškas, P.
Numerical simulation of turbulent mixed convection heat transfer variation along a vertical flat channel for aiding flows
(2009) Heat Transfer Research, 40 (5), pp. 443-454. 

Xie, Z., Zhou, Y.
Optimization research on guide plate installed in quadrate 90° curved duct
(2009) Yingyong Jichu yu Gongcheng Kexue Xuebao/Journal of Basic Science and Engineering, 17 (4), pp. 566-572. 

Liu, H., Xin, N., Cao, Q., Sha, L., Sun, D., Wu, S.
Numerical simulation of the influence of over fire air position on the combustion in a single furnace boiler with dual circle firing
(2009) Korean Journal of Chemical Engineering, pp. 1-7. Article in Press. 

Wang, C., Chen, W., Tian, D., Jia, X., Zhao, H.
A CFD simulation of the flow field of a power law fluid in an eccentric annulus
(2009) Drilling Fluid and Completion Fluid, 26 (3), pp. 62-64. 

Zhang, J., Lü, J., Tu, Y., Kong, C., Ge, W.
Numerical analysis of high-speed train induced impulsive pressure on railway bridge's noise barrier and its flange plate with collision-preventing wall
(2009) Zhongguo Tiedao Kexue/China Railway Science, 30 (3), pp. 27-32. 

Li, H.-F., Zhang, Y.-N., Wang, D., Yan, N.-M.
Simulation for thermal current field in powertrain cabin of armored vehicle with electric transmission system
(2009) Xitong Fangzhen Xuebao / Journal of System Simulation, 21 (8), pp. 2405-2409. 

Betancourt-Quiroga, F.O., Palacio-Pérez, A., Rodríguez-Valdés, A., Silva-Casarín, R.
Numerical determination of oil spill areas in water bodies [Determinación numérica del área de derrames de petróleo en cuerpos de agua]
(2009) Ingenieria Hidraulica en Mexico, 24 (2), pp. 5-22. 

Lee, C.-H., Tseng, C.-H., Lin, H.-I., Yeh, H.-F.
Assessment of fracture empirical models for estimating apertures
(2009) Journal of the Chinese Institute of Civil and Hydraulic Engineering, 21 (1), pp. 25-34. 

Migoya, E., Crespo, A., García, J., Hernández, J.
A simplified model of fires in road tunnels. Comparison with three-dimensional models and full-scale measurements
(2009) Tunnelling and Underground Space Technology, 24 (1), pp. 37-52. 

Song, T.H., Shin, D.K., Kim, Y.P., Choi, M.J., Kwon, J.L., Choi, B.H.
Analysis of arc process in high voltage circuit breakers using PHOENICS
(2009) 18th Symposium on Physics of Switching Arc, FSO 2009, pp. 284-287. 

Nishimura, S., Nishi, Y., Ueda, N.
Development of 4S and related technologies (7) - Analytical evaluation of RVACS performance under loss of stacks condition
(2009) International Congress on Advances in Nuclear Power Plants 2009, ICAPP 2009, 1, pp. 580-587. 

Kaiser, A.S., Zamora, B., Viedma, A.
Numerical correlation for natural convective flows in isothermal heated, inclined and convergent channels, for high Rayleigh numbers
(2009) Computers and Fluids, 38 (1), pp. 1-15. 

Vaidya, A.M., Maheshwari, N.K., Vijayan, P.K., Saha, D., Sinha, R.K.
Effect of inlet configuration on moderator velocity and temperature distribution inside the calandria of a heavy water reactor
(2008) International Conference on Nuclear Engineering, Proceedings, ICONE, 2, pp. 289-296. 

Borgohain, A., Maheshwari, N.K., Vijayan, P.K., Saha, D., Sinha, R.K.
Heat transfer studies on lead-bismuth eutectic flows in circular tubes
(2008) International Conference on Nuclear Engineering, Proceedings, ICONE, 3, pp. 589-594. 

Zhao, Y., Zhao, H., Shi, Y.
Microstructure simulation in welding 1Cr18Ni9Ti steel
(2008) Hanjie Xuebao/Transactions of the China Welding Institution, 29 (12), pp. 13-16. 

Mitianiec, W.
Theoretical and experimental investigations of CNG ignition and combustion with controlled gas motion
(2008) Proceedings of the 7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008, pp. 847-852. 

Banerjee, I., Chandra, L., Laxman, D., Kumar, A., Gopal, C.A., Shivakumar, N.S., Padmakumar, G., Anand Babu, C., Vaidyanathan, G.
Gas entrainment in scaled model of pool type LMFBR
(2008) Societe Francaise d'Energie Nucleaire - International Congress on Advances in Nuclear Power Plants - ICAPP 2007, "The Nuclear Renaissance at Work", 1, pp. 111-117. 

Doulati Ardejani, F., Jodieri Shokri, B., Moradzadeh, A., Soleimani, E., Ansari Jafari, M.
A combined mathematical geophysical model for prediction of pyrite oxidation and pollutant leaching associated with a coal washing waste dump
(2008) International Journal of Environmental Science and Technology, 5 (4), pp. 517-526. 

Stathopoulou, O.I., Assimakopoulos, V.D.
Numerical study of the indoor environmental conditions of a large athletic hall using the CFD code PHOENICS
(2008) Environmental Modeling and Assessment, 13 (3), pp. 449-458. 

Zamora, B., Kaiser, A.S., Viedma, A.
On the effects of Rayleigh number and inlet turbulence intensity upon the buoyancy-induced mass flow rate in sloping and convergent channels
(2008) International Journal of Heat and Mass Transfer, 51 (19-20), pp. 4985-5000. 

Ren, M.-L., Chen, C., Guo, Q., Yang, Y.-X., Kang, G.-Q., Luo, H.-L.
Numerical analysis and effectively using of piston-effect in subway
(2008) Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 42 (8), pp. 1376-1380+1391. 

Li, R., Yu, Z., Qi, K.
Numerical simulation and analysis of flow field in TIG arc brazed filler metal droplet
(2008) Materials Science Forum, 575-578 PART 1, pp. 716-721. 

Gajapathy, R., Velusamy, K., Selvaraj, P., Chellapandi, P., Chetal, S.C., Sundararajan, T.
Thermal hydraulic investigations of intermediate heat exchanger in a pool-type fast breeder reactor
(2008) Nuclear Engineering and Design, 238 (7), pp. 1577-1591. 

Huang, Y., Yang, Y., Wei, G., Shi, W., Li, Y.
Boundary coupled dual-equation numerical simulation on mass transfer in the process of laser cladding
(2008) Chinese Optics Letters, 6 (5), pp. 356-360. 

Zhang, R., Yin, Y., Fan, D., Katayama, S.J.
Numerical simulation of the mechanism for penetration increasing of A-TIG welding
(2008) Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 44 (5), pp. 175-180. 

Freitas, G.C.S., Peixoto, F.C., Vianna Jr., A.S.
Simulation of a thermal battery using Phoenics®
(2008) Journal of Power Sources, 179 (1), pp. 424-429. 

Baltrenas, P., Morkuniene, J., Vaitiekunas, P.
Mathematical simulation of solid particle dispersion in the air of Vilnius city
(2008) Journal of Environmental Engineering and Landscape Management, 16 (1), pp. 15-22. 

Qi, X.-N., Liu, Z.-Y.
Investigation on drag reduction of trucks
(2008) Journal of Shanghai Jiaotong University (Science), 13 E (2), pp. 201-205. 

Vaidya, A.M., Maheshwari, N.K., Vijayan, P.K., Saha, D.
Computational study of moderator flow and temperature fields in the calandria vessel of a heavy water reactor using the PHOENICS code
(2008) Kerntechnik, 73 (1-2), pp. 33-40. 

Assimakopoulos, V.D., Stathopoulou, O.I., Halios, C., Helmis, C.G.
Numerical investigation of indoor environmental conditions in an office
(2008) International Journal of Ventilation, 6 (4), pp. 315-326. 

Lei, B.
Numerical simulation of smoke flow during highway tunnel fire
(2008) Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 36 (2), pp. 64-69. 

Wang, S.-L., Shi, X.-J., Zhao, S.-H., Liu, Q., Wang, H.-X.
The technical research and application development of groove surface in turbulent drag reduction
(2008) Xinan Shiyou Daxue Xuebao/Journal of Southwest Petroleum University, 30 (1), pp. 146-150. 

Gacem, H., Jemmali, M., Bessrour, J.
Flow modelling and numerical simulation of post combustion room [Modélisation et simulation numérique d'une chambre de postcombustion]
(2008) Mecanique et Industries, 9 (1), pp. 81-91. 

Kassomenos, P., Karayannis, A., Panagopoulos, I., Karakitsios, S., Petrakis, M.
Modelling the dispersion of a toxic substance at a workplace
(2008) Environmental Modelling and Software, 23 (1), pp. 82-89. 

Mrenes, M.
Simulation of gas flow in a private burner mixing pipe
(2008) Annals of DAAAM and Proceedings of the International DAAAM Symposium, pp. 915-916. 

Cândido, C., Bittencourt, L., Sacramento, A.
Building regulation and thermal comfort: The opening typology influence on natural cooling inside office buildings in maceió
(2007) IBPSA 2007 - International Building Performance Simulation Association 2007, pp. 1054-1061. 

Spencer, J., Zhai, Z.
Fast evaluation of sustainable heating and cooling strategies for solar homes with integrated energy and cfd modeling
(2007) IBPSA 2007 - International Building Performance Simulation Association 2007, pp. 1677-1683. 

Llombart, A., Mallet, A., Burillo, N., Alvarez, O., Talayero, A.
Influence of orography on wind resource assessment programs
(2007) European Wind Energy Conference and Exhibition 2007, EWEC 2007, 2, pp. 1009-1015. 

Fico Jr., N., De Souza, V.C.
Numeric simulation of radiation chamber in furnaces #610 - Transport processes in energy systems II (07A03)
(2007) AIChE Annual Meeting, Conference Proceedings, 10 p. 

Yu, J., Xia, W., Feng, X.
Numerical simulation and experimental validation of flow and heat transfer in flat-tube heat exchangers
(2007) 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, 1, pp. 539-546. 

Ramírez-Argáez, M., Contreras-Bustos, F., González-Rivera, C.
On the fluid flow and mixing phenomena in ladles equipped with impeller and gas purging for degassing of Al-based alloys
(2007) Materials Science Forum, 560, pp. 145-150. 

Meng, Q., Chen, Z.
Simulation and research on indoor environment control mode basing on thermal comfort: A case study in the aviation building in sanya airport
(2007) IBPSA 2007 - International Building Performance Simulation Association 2007, pp. 161-168. 

Natesan, K., Velusamy, K., Selvaraj, P., Chellapandi, P., Chetal, S.C.
Thermal hydraulic study on detection of random failure of fuel by delayed neutron detection system
(2007) Nuclear Engineering and Design, 237 (23), pp. 2219-2231. 

Sheaffer, P.M., Zittel, P.F.
Carbon oxidation in low pressure laminar H2 + O2 flames II: The lifted-flame testbed
(2007) Collection of Technical Papers - 37th AIAA Fluid Dynamics Conference, 3, pp. 2047-2064. 

Megri, A.C.
Building load and energy simulation programs and the design process
(2007) International Journal of Ventilation, 6 (2), pp. 177-192. 

Hemanath, M.G., Meikandamurthy, C., Ramakrishnan, V., Rajan, K.K., Rajan, M., Vaidyanathan, G.
Cellular convection in vertical annuli of fast breeder reactors
(2007) Annals of Nuclear Energy, 34 (8), pp. 679-686. 

Zhao, H.-J., Zhang, Q.-S., Zhang, G.-Z., Zhao, S.-H., Wang, S.-L.
PHOENICS simulation for the effect of shut-down to contamination in batch transportation
(2007) Xinan Shiyou Daxue Xuebao/Journal of Southwest Petroleum University, 29 (4), pp. 149-151. 

Tchouvelev, A.V., Cheng, Z., Agranat, V.M., Zhubrin, S.V.
Effectiveness of small barriers as means to reduce clearance distances
(2007) International Journal of Hydrogen Energy, 32 (10-11), pp. 1409-1415. 

Abdul Ghani, A.G., Farid, M.M.
Numerical simulation of solid-liquid food mixture in a high pressure processing unit using computational fluid dynamics
(2007) Journal of Food Engineering, 80 (4), pp. 1031-1042. 

Helmis, C.G., Tzoutzas, J., Flocas, H.A., Halios, C.H., Stathopoulou, O.I., Assimakopoulos, V.D., Panis, V., Apostolatou, M., Sgouros, G., Adam, E.
Indoor air quality in a dentistry clinic
(2007) Science of the Total Environment, 377 (2-3), pp. 349-365. 

Jiang, L., Fu, Q., Zhang, Q.
Numerical study for unsteady heat transfer of underground pipelines
(2007) Petroleum Refinery Engineering, 37 (5), pp. 36-39. 

Wu, H., Wang, S., Zhu, D.
Modelling and evaluation of cooling capacity of earth-air-pipe systems
(2007) Energy Conversion and Management, 48 (5), pp. 1462-1471. 

Wan, F., Zhang, Q., Jiang, G.
Numerical simulation of contamination concentration in erect batch pipeline
(2007) Petroleum Refinery Engineering, 37 (1), pp. 48-51. 

Lee, J.-Ch., Hwang, J.-H., Kim, Y.-J.
Feasibility study on the vacuum arc modelling with an axial magnetic field
(2007) 17th Symposium on Physics of Switching Arc, FSO 2007, 1, pp. 149-152. 

Zhang, R.H., Fan, D.
Numerical simulation of effects of activating flux on flow patterns and weld penetration in ATIG welding
(2007) Science and Technology of Welding and Joining, 12 (1), pp. 15-23. 

Utkin, A.B., Lavrov, A., Vilar, R.
Application of rangefinder for small forest fire detection
(2006) Proceedings of SPIE - The International Society for Optical Engineering, 6359, art. no. 635915, . 

Zhao, Y., Shi, Y., Lei, Y.
The study of surface-active element oxygen on flow patterns and penetration in A-TIG welding
(2006) Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 37 (3), pp. 485-493. 

Wróblewska, A., Bartoszewicz, J., Bogusławski, L.
Intensification of heat transfer on a deformed surface of a short smoke tube
(2006) Archives of Thermodynamics, 27 (4), pp. 235-244. 

Kawabata, O., Kajimoto, M.
Analyses of high pressure molten debris dispersion for a typical PWR plant
(2006) International Conference on Nuclear Engineering, Proceedings, ICONE, 2006, 9 p. 

Clus, O., Muselli, M., Beysens, D., Nikolayev, V., Ouazzani, J.
Computational fluid dynamic (CFD) applied to radiative cooled dew condensers
(2006) 2006 1st International Symposium on Environment Identities and Mediterranean Area, ISEIM, art. no. 4150462, pp. 217-221. 

Bharj, J.S., Sahaya, R.R., Datta, D., Dharne, S.P.
Effect of flow configuration on velocity and temperature distribution of moderator inside 540 MWe PHWR calandria using CFD techniques
(2006) Proceedings of the 2006 International Congress on Advances in Nuclear Power Plants, ICAPP'06, 2006, pp. 1134-1142. 

Lai, L.S., Djambazov, G.S., Lai, C.-H., Pericleous, K.A., Magoules, F.
Experience of using a CFD code for estimating the noise generated by gusts along the sunroof of a car
(2006) 13th International Congress on Sound and Vibration 2006, ICSV 2006, 4, pp. 2951-2958. 

Gunabushanam, N., Venkata Suresh, J.
Experimental and CFD analysis of hydrogenerator ventilation components
(2006) 41st International Conference on Large High Voltage Electric Systems 2006, CIGRE 2006, 8 p. 

Stathopoulou, O.I., Assimakopoulos, V.D.
Indoor environmental conditions of athletic halls: Experimental and numerical investigation
(2006) WIT Transactions on Ecology and the Environment, 86, pp. 345-353. 

Mumovic, D., Crowther, J.M., Stevanovic, Z.
Integrated air quality modelling for a designated air quality management area in Glasgow
(2006) Building and Environment, 41 (12), pp. 1703-1712. 

Tan, F.L.
Melting of PCM in a finned enclosure under constant heat rate condition - A numerical study
(2006) International Journal of Heat and Technology, 24 (1), pp. 89-95. 

Calbó, J., Pozo, M., Moreno, J., Gravdahl, A.
Micro-scale effects over the wind: Modelling flow around buildings with WindSim-Phoenics
(2006) European Wind Energy Conference and Exhibition 2006, EWEC 2006, 1, pp. 680-687. 

Zhao, H.-J., Zhang, Q.-S., Zhang, G.-Z., Zhou, S.-D.
Numerical simulation of the soil temperature field during stopping transportation of heat crude oil pipeline by PHOENICS
(2006) Shiyou Huagong Gaodeng Xuexiao Xuebao/Journal of Petrochemical Universities, 19 (4), pp. 76-79. 

Zhao, H.-J., Zhang, Q.-S., Zhang, G.-Z., Wang, S.-L.
PHOENICS-based numerical study of mass transfer with two petroleum products in a batch pipeline
(2006) Beijing Huagong Daxue Xuebao (Ziran Kexueban)/Journal of Beijing University of Chemical Technology (Natural Science Edition), 33 (6), pp. 22-25. 

Qingqing, P., Wei, L.
The numerical simulation of VOCs concentration in a new painted office
(2006) Proceedings of the A and WMA Indoor Environmental Quality: Problems, Research and Solutions Conference 2006, 2, pp. 766-770. 

Balis, D., Amiridis, V., Kazadzis, S., Papayannis, A., Tsaknakis, G., Tzortzakis, S., Kalivitis, N., Vrekoussis, M., Kanakidou, M., Mihalopoulos, N., Chourdakis, G., Nickovic, S., Pérez, C., Baldasano, J., Drakakis, M.
Optical characteristics of desert dust over the east Mediterranean during summer: A case study
(2006) Annales Geophysicae, 24 (3), pp. 807-821. 

Liau, V.K., Lee, B.Y., Song, K.D., Park, K.Y.
The influence of pressure on SF6 Arc with contact evaporation
(2006) 12th Biennial IEEE Conference on Electromagnetic Field Computation, CEFC 2006, art. no. 1633286, . 

Zhong, J.-Y., Lin, X., He, R.-T.
The parallel computation simulation of the extinguishing arc performance in the self-extinguished SF6 circuit breaker
(2006) Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 26 (20), pp. 154-159. 

Shen, C.-M., Sun, R., Wu, S.-H.
Numerical simulation of pulverized coal combustion in a 1GW dual circle tangential firing single chamber boiler
(2006) Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 26 (15), pp. 51-57. 

Sun, R., Li, Z., Sun, S., Wu, S.
Numerical simulation on pulverized coal combustion process in a tangential firing furnace
(2006) Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 42 (8), pp. 107-113. 

Young, N.C., Dong, S.Y.
On the modeling of electro-hydrodynamic flow in a wire-plate electrostatic precipitator
(2006) Korean Journal of Chemical Engineering, 23 (4), pp. 560-565. 

Paliulis, D.
Numerical modeling of kinetics of heavy metal sorption from polluted water
(2006) Journal of Environmental Engineering and Landscape Management, 14 (1), pp. 10-15. 

Wei, W.-S., Yang, Y.-W., Xu, J., Fan, Y., Bao, X.-J.
Exit structure of the mist swirl separators in acrylonitrile production units
(2006) Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering, 6 (3), pp. 352-356. 

Li, L., Li, X., Lin, B., Zhu, Y.
Simulation of canopy flows using k-ε two-equation turbulence model with source/sink terms
(2006) Qinghua Daxue Xuebao/Journal of Tsinghua University, 46 (6), pp. 753-756. 

Yang, G.-S., An, Y.-L., Peng, L.-M., Zhang, J.-H.
Simulation of smoke flow and longitudinal ventilation in tunnel fire
(2006) Transactions of Nonferrous Metals Society of China (English Edition), 16 (3), pp. 741-746. 

Abdul Ghani, A.G., Farid, M.M.
Using the computational fluid dynamics to analyze the thermal sterilization of solid-liquid food mixture in cans
(2006) Innovative Food Science and Emerging Technologies, 7 (1-2), pp. 55-61. 

Liau, V.K., Lee, B.Y., Song, K.D., Park, K.Y.
The influence of contacts erosion on the SF6 arc
(2006) Journal of Physics D: Applied Physics, 39 (10), pp. 2114-2123. 

Ramírez-Argáez, M.A., Contreras, F., González, C.
Mathematical modeling of mixing phenomena in ladles of aluminum equipped with impeller and gas purging for degassing [Modelación matemática del mezclado en ollas (cucharas) de aluminio equipadas con la técnica de desgasificación rotor-inyector]
(2006) Revista de Metalurgia (Madrid), 42 (3), pp. 185-202. 

Ou, J.-P., Ma, A.-C., Lai, C.-B., Deng, R.-H.
Numerical simulation in the flow and heat transfer in a gas-fired boiler with a built-in stable-combustion heat island
(2006) Reneng Dongli Gongcheng/Journal of Engineering for Thermal Energy and Power, 21 (3), pp. 291-294. 

Baltrenas, P., Zagorskis, A.
Simulating aerodynamics processes in a biofilter
(2006) Chemical and Petroleum Engineering, 42 (5-6), pp. 278-281. 

Hillert, W.
The Bonn electron stretcher accelerator ELSA: Past and future
(2006) European Physical Journal A, 28 (SUPPL. 1), pp. 139-148. 

Wang, F.-H., Jin, Z.-J., Zhu, Z.-S.
Comparison of arc plasma numerical simulation between potential approach and magnetic approach in DC electric arc furnace
(2006) Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 40 (4), pp. 577-582+592. 

He, C., Marsalek, J., Rochfort, Q., Krishnappan, B.G.
Case study: Refinement of hydraulic operation of a complex CSO storage/ treatment facility by numerical and physical modeling
(2006) Journal of Hydraulic Engineering, 132 (2), pp. 131-139. 

Liang, L., Xiaofeng, L., Borong, L., Yingxin, Z.
Improved k-ε two-equation turbulence model for canopy flow
(2006) Atmospheric Environment, 40 (4), pp. 762-770. 

Shen, C.-M., Sun, R., Wu, S.-H.
Numerical simulation of combustion processes in an ultra supercritical boiler
(2006) Dongli Gongcheng/Power Engineering, 26 (1), pp. 32-37. 

Wang, F., Jin, Z., Zhu, Z.
Numerical study of dc arc plasma and molten bath in dc electric arc furnace
(2006) Ironmaking and Steelmaking, 33 (1), pp. 39-44. 

Xu, Y.-L., Wei, Y.-H., Dong, Z.-B., Zhang, Y.-L.
Comparison of GTAW temperature field of stainless steel simulated by different software packages
(2006) Hanjie Xuebao/Transactions of the China Welding Institution, 27 (1), pp. 9-12+16. 

Chow, W.K.
Fire safety concern for green or sustainable buildings with natural ventilation provision
(2006) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 8 p. 

Prat, O.P., Ducoste, J.J.
Modeling spatial distribution of floc size in turbulent processes using the quadrature method of moment and computational fluid dynamics
(2006) Chemical Engineering Science, 61 (1), pp. 75-86. 

Ambjörn, C., Liungman, O., Törling, G.
A high-resolution oil drift model on the Swedish coast
(2005) 2005 International Oil Spill Conference, IOSC 2005, pp. 3486-3490. 

Shevchuk, I.V., Delas, N.I.
Aerodynamics and turbulent flow heat exchange in the rotary disk air cleaner
(2005) Heat Transfer Research, 36 (1-2), pp. 104-113. 

Ning, Z., Cheung, C.S., Lu, Y., Liu, M.A., Hung, W.T.
Experimental and numerical study of the dispersion of motor vehicle pollutants under idle condition
(2005) Atmospheric Environment, 39 (40), pp. 7880-7893. 

Chun, Y.N., Berezin, A.A., Brocilo, D., Mizeraczyk, J., Chang, J.-S.
Modelling of near corona wire electrohydrodynamic flow in a wire-plate electrostatic precipitator
(2005) Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, 2005, art. no. 1560724, pp. 478-481. 

Li, X., Chen, D., Wang, Q., Li, Z.
Simulation of the effects of several factors on arc plasma behavior in low voltage circuit breaker
(2005) Plasma Science and Technology, 7 (5), pp. 3069-3072. 

Chen, C.-W.
Numerical analysis for the multi-phase flow of pulverized coal injection inside blast furnace tuyere
(2005) Applied Mathematical Modelling, 29 (9), pp. 871-884. 

Wang, F.-H., Jin, Z.-J., Zhu, Z.-S.
Numerical simulation of plasma in DC electric arc furnace
(2005) Gaoya Dianqi/High Voltage Apparatus, 41 (4), pp. 241-244+248. 

Li, G., Nie, W., Yu, Y.
Motion trace of particles in classifying flow field
(2005) Journal Wuhan University of Technology, Materials Science Edition, 20 (2), pp. 71-73. 

Zhang, Z., Yang, L., Ni, F.
Numerical simulation on the solidification of ZA27 alloy by a two-phase flow model
(2005) Materials Science Forum, 475-479 (IV), pp. 3203-3206. 

Ye, X., Lian, Z.
Air distribution numerical simulating of isothermal jet with interference parameters in large space
(2005) Simulation Modelling Practice and Theory, 13 (2), pp. 139-155. 

Liu, S.-L., Lu, J., Luo, L.-N., Zhang, H., He, S., Huang, H.-Y.
Simulation and analysis of the indoors thermal environment in the high elevated waiting hall of Kunming railway station
(2005) Chongqing Jianzhu Daxue Xuebao/Journal of Chongqing Jianzhu University, 27 (2), pp. 76-79. 

Yang, W.-J., Sun, F.-Z., Huang, X.-Y., Shi, Y.-T., Wang, N.-H., Cui, H.
Three-dimensional numerical simulation and analysis of the steam flow field and heat exchange performance of a 300 MW steam turbine's condenser
(2005) Dongli Gongcheng/Power Engineering, 25 (2), pp. 174-178. 

Lee, J.-C., Kim, Y.J.
Numerical modeling of SF6 thermal plasma generated during the switching process
(2005) Thin Solid Films, 475 (1-2 SPEC. ISS.), pp. 72-80. 

Ruether, N., Singh, J.M., Olsen, N.R.B., Atkinson, E.
3-D computation of sediment transport at water intakes
(2005) Proceedings of the Institution of Civil Engineers: Water Management, 158 (1), pp. 1-8. 

Graovac, M., Dawson, F.P., Fila, M., Cormack, D.E.
Fluorescent lamp cold starting improvement
(2005) IEEE Transactions on Industry Applications, 41 (2), pp. 544-550. 

Yuan, X.Q., Zhao, T.Z., Guo, W.K., Xu, P.
Plasma flow characteristics inside the supersonic D.C. plasma torch
(2005) International Journal of Modern Physics E, 14 (2), pp. 225-238. 

Poser, K., Rohde, M., Schneider, J., Zum Gahr, K.-H.
TiN-Particle reinforced alumina for unlubricated tribological applications mated with metallic counterbodies
(2005) Materialwissenschaft und Werkstofftechnik, 36 (3-4), pp. 122-128. 

Jifei, G., Guowei, G., Zilong, Z., Yalei, Z.
CFD numerical simulation applied in the design of the jet aerator
(2005) 4th International Conference on Environmental Informatics, ISEIS 2005, pp. 226-231. 

Kim, K.H., Hwang, K.M., Jin, T.E.
Fluid mixing analysis for predicting shell wall thinning of a feedwater heater
(2005) Journal of Mechanical Science and Technology, 19 (1), pp. 173-180. 

Zhou, J., He, P., Cheng, D., Dai, Z., Yu, Z.
Mass transfer phenomena during coal char gasification reaction in thermobalance setup
(2005) Huagong Xuebao/Journal of Chemical Industry and Engineering (China), 56 (1), pp. 35-40. 

Chiang, J.S., Chuang, S.H., Wu, Y.K., Lee, H.J.
Numerical simulation of heat transfer in a desktop computer with heat-generating components
(2005) International Communications in Heat and Mass Transfer, 32 (1-2), pp. 184-191. 

Bolot, R., Li, J., Coddet, C.
Modeling of thermal plasma jets: A comparison between Phoenics and Fluent
(2004) Proceedings of the International Thermal Spray Conference, pp. 764-769. 

Hwang, K.M., Jin, T.E., Kim, K.H.
A study on fluid mixing analysis for predicting shell wall thinning of a feedwater heater
(2004) Proceedings of the 2004 International Congress on Advances in Nuclear Power Plants, ICAPP'04, pp. 1742-1748. 

Sinha, A.K., Zhao, Y.
Athematical modeling of the United States Steel Corporation Gary Works No. 13 Blast Furnace bustle pipe and tuyere gas flow - An investigation of the effect of tuyere diameter on tuyere velocity
(2004) AISTech - Iron and Steel Technology Conference Proceedings, 1, pp. 237-242. 

Yuan, X.Q., Li, H., Zhao, T.Z., Wang, F., Guo, W.K., Xu, P.
Comparative study of flow characteristics inside plasma torch with different nozzle configurations
(2004) Plasma Chemistry and Plasma Processing, 24 (4), pp. 585-601. 

Zhang, R., Feng, C., Chen, L.
Cook-off test and its numerical simulation of detonator based on RDX
(2004) Progress in Safety Science and Technology Volume 4:Proceedings of the 2004 International Symposium on Safety Science and Technology, (PART B), pp. 2959-2964. 

Wang, H., Liu, R., Chen, S.
Experimental simulation and application research of plane jet isolating dust theory
(2004) Progress in Safety Science and Technology Volume 4:Proceedings of the 2004 International Symposium on Safety Science and Technology, (PART A), pp. 1367-1372. 

Baltrenas, P., Vaiškunaite, R., Špakauskas, V.
Experimental study and mathematical modelling of biofilter aerodynamic resistance
(2004) Journal of Environmental Engineering and Landscape Management, 12 (3), pp. 79-84. 

Yapici, H., Yalçin, Ş.
Transient temperature and thermally induced stress distributions in a partly-circumferentially heated cylindrical workpiece
(2004) Heat and Mass Transfer/Waerme- und Stoffuebertragung, 41 (2), pp. 104-111. 

Koptsev, V.V.
Modeling the aerodynamics of the burners in kilns
(2004) Metallurgist, 48 (11-12), pp. 548-552. 

Yuan, X.Q., Li, H., Zhao, T.Z., Guo, W.K., Xu, P.
Effects of nozzle configuration on flow characteristics inside DC plasma torch
(2004) Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 43 (10), pp. 7249-7253. 

Meng, Y., Lian, Z., Tang, B., Xu, T.
Research on the bottomhole flow field of reverse circulation bit and its product development
(2004) Tianranqi Gongye/Natural Gas Industry, 24 (9), pp. 51-53+7. 

Shih, C.J., Liu, G.C.
Optimal design methodology of plate-fin heat sinks for electronic cooling using entropy generation strategy
(2004) IEEE Transactions on Components and Packaging Technologies, 27 (3), pp. 551-559. 

Xie, H., Gao, Z., Zhou, Z.
Three-dimensional numerical simulation of nuclear heating reactor under asymmetric operation condition
(2004) Heat Transfer Engineering, 25 (6), pp. 62-71. 

Zhang, P., Liu, C., Yuan, X., Yu, G.
CFD simulations of liquid phase flow in structured packed column
(2004) Huagong Xuebao/Journal of Chemical Industry and Engineering (China), 55 (8), pp. 1369-1373. 

Kaiser, A.S., Zamora, B., Viedma, A.
Correlation for Nusselt number in natural convection in vertical convergent channels at uniform wall temperature by a numerical investigation
(2004) International Journal of Heat and Fluid Flow, 25 (4), pp. 671-682. 

Yuan, X.-Q., Li, H., Zhao, T.-Z., Yu, G.-Y., Guo, W.-K., Xu, P.
Numerical modeling of supersonic plasma jet
(2004) Wuli Xuebao/Acta Physica Sinica, 53 (8), pp. 2638-2643. 

Lian, Z.-W., Zhang, G.-R., Ye, X.-J.
Evaluation of air distribution in an air conditioned railway carriage
(2004) Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 38 (6), pp. 961-966. 

Chun, L.-J., Chiang, Y.-C., Ting, C.-C., Ma, R.-H., Chen, S.-L.
Pressure analysis of platform screen door subjected to a moving train in mass rapid transport underground station
(2004) Journal of Mechanics, 20 (2), pp. 159-166. 

Parsons, D.R., Walker, I.J., Wiggs, G.F.S.
Numerical modelling of flow structures over idealized transverse aeolian dunes of varying geometry
(2004) Geomorphology, 59 (1-4), pp. 149-164. 

Huang, Y., Liang, G., Su, J.
3-D transient numerical simulation on the process of laser cladding by powder feeding
(2004) Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials (Eng Ed), 11 (1), pp. 13-17. 

Huang, Y.L., Liang, G.Y., Su, J.Y.
Comprehensive model of laser cladding by powder feeding
(2004) Acta Metallurgica Sinica (English Letters), 17 (1), pp. 21-27. 

Zou, D.N., Yang, J., Huang, Y.L., Su, J.Y.
Numerical analysis of heat transfer during laser cladding to synthesize TiCP/Al composite
(2004) Acta Metallurgica Sinica (English Letters), 17 (1), pp. 1-6. 

Song, K.-D., Lee, B.-Y., Park, K.-Y.
Calculation of Post-Arc Current in a Laval Nozzle
(2003) Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, 2, pp. 804-809. 

Zakhia, N.Z.
Computational analysis of flow dynamics of slush hydrogen in transfer ducts
(2003) Proceedings of the ASME Fluids Engineering Division Summer Meeting, 1, pp. 373-378. 

Zakhia, N.Z.
Innovative compututational simulation of SLUSH hydrogen in vacuum jacketed ducts
(2003) Proceedings of the ASME Fluids Engineering Division Summer Meeting, 1, pp. 989-994. 

Baltrenas, P., Vasaryavichus, S., Petrajtis, E.
Numerical modeling of propagation of solid particles in atmosphere
(2003) Khimicheskoe I Neftegazovoe Mashinostroenie, (10), pp. 46-48. 

Yu, L., Jiang, P., Ren, Z.
Numerical simulation for turbulent transpiration cooling processes
(2003) Qinghua Daxue Xuebao/Journal of Tsinghua University, 43 (12), pp. 1668-1671. 

Aynsley, R., Ali, M.
Optimizing ceiling fan locations with CFD
(2003) Architectural Engineering, Building Integration Solutions, pp. 111-114. 

Schmidtke, O., Sutiono, A., Herr, M., Hapke, J.
Simulation of two-phase flow of hydrogen at cryogenic conditions
(2003) Computational Engineering, 4, pp. 475-484. 

Zakhia, N.Z.
The mixing phenomena of SLUSH hydrogen in ducts
(2003) Proceedings of the ASME Fluids Engineering Division Summer Meeting, 1, pp. 959-964. 

Zakhia, N.Z.
The phase change effect of slush hydrogen in transfer lines
(2003) Proceedings of the ASME Fluids Engineering Division Summer Meeting, 1, pp. 305-310. 

Den Boer, D.J., Mertens, J.J., Van Oerle, N.J., Wijnia, J.F.
Validation of CFD calculations of full scale medium sized fires in a two lane road tunnel
(2003) International Symposium on Aerodynamics and Ventilation of Vehicle Tunnels, 2, pp. 657-667. 

Su, J.-Y., Zou, D.-N.
Numerical simulation of the process of laser cladding in-situ synthesis TiCp/Al composite on the surface of aluminum alloy
(2003) Modeling of Casting, Welding and Advanced Solidification Processes, pp. 581-588. 

Song, K.D., Lee, B.Y., Park, K.Y.
Analysis of Thermal Recovery for SF6 Gas-Blast ARC within Laval Nozzle
(2003) Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 42 (11), pp. 7073-7079. 

Papakonstantinou, K., Chaloulakou, A., Duci, A., Vlachakis, N., Markatos, N.
Air quality in an underground garage: Computational and experimental investigation of ventilation effectiveness
(2003) Energy and Buildings, 35 (9), pp. 933-940. 

Lin, X., Zhong, J.-Y.
Approach to the computation of gas flow field in the arc-quenching chamber of self-blasting circuit breaker
(2003) Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 23 (10), pp. 164-168. 

Chen, C.-W., Chen, C.-W., Liu, S.-H.
A mathematical model of fluid flow phenomena for the liquid bath in smelting reduction processes
(2003) ISIJ International, 43 (7), pp. 990-996. 

Ke, Y., Wang, H.Y., Wu, Y.C.
MHD simulation of the liquid metal/helium gas dual-cooled waste transmutation blanket for FDS
(2003) Fusion Engineering and Design, 69 (1-4 SPEC), pp. 431-435. 

Modelling airflow at stadium
(2003) Engineers Australia, 75 (9), p. 44. 

Hwang, K.M., Jin, T.E., Kim, K.H.
Thermal-mixing analyses for safety injection at partial loop stagnation of a nuclear power plant
(2003) KSME International Journal, 17 (9), pp. 1380-1387. 

Zhang, J., Sun, R., Wu, S.-H., Chen, B.-H., Li, Z.-Q., Qin, Y.-K.
Experimental and numerical study on swirling combustion process in a 200 MW pulverized coal fired boiler
(2003) Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 23 (8), pp. 215-220. 

Zou, D., Huang, Y., Liang, G., Su, J.
Numerical simulation and experimental verification of laser cladding and reaction TiCp/Al composite material
(2003) Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 32 (8), pp. 607-609. 

Hao, J., Han, W., Hu, G., Gao, S., Deng, X.
Distribution and improvement of flow field in microwave extractor
(2003) Huagong Xuebao/Journal of Chemical Industry and Engineering (China), 54 (7), pp. 923-929. 

Zhan, D.-X., Wang, J.-M., Lin, L.-M.
Numerical investigations into the friction reduction by microbubbles for flat plates
(2003) Journal of Hydrodynamics, 15 (3), pp. 82-88. 

Huang, Y., Zou, D., Liang, G., Su, J.
Numerical simulation on cladding track, fluid flow field and temperature field in laser cladding process with powder feeding
(2003) Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 32 (5), pp. 330-334. 

Ghani, A.G.A., Farid, M.M., Chen, X.D.
A computational and experimental study of heating and cooling cycles during thermal sterilization of liquid foods in pouches using CFD
(2003) Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 217 (1), pp. 1-9. 

Xu, C.-J., Chen, H.-Y.
Design optimization of ADS target based on numerical simulations of flow field.
(2003) Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 37 (2), pp. 111-115. 

Chuang, S.-H., Chiang, J.-S., Kuo, Y.-M.
Numerical simulation of heat transfer in a three-dimensional enclosure with three chips in various position arrangements
(2003) Heat Transfer Engineering, 24 (2), pp. 42-59. 

Wang, Z.-M., Duan, X.-L., Qiu, X.-Q.
Numerical simulation study on the turbulent diffusion flame of a gas burner
(2003) Petrochemical Equipment, 32 (2), pp. 5-8. 

Abdul Ghani, A.G., Farid, M.M., Zarrouk, S.J.
The effect of can rotation on sterilization of liquid food using computational fluid dynamics
(2003) Journal of Food Engineering, 57 (1), pp. 9-16. 

Xie, H., Gao, Z.-Y.
Numerical analysis of the effect of coolant containers on the 5 MW nuclear heating reactor
(2003) Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 37 (1), pp. 54-59. 

Zinov'ev, A.V., Ivanov, A.V., Mastryukov, B.S.
Concentration of toxicant inside production room
(2002) Metallurg, (11), pp. 24-28. 

De Queiroz Guimarães, F.M., De Almeida Barbabela, B., Rubião, L.E.G., Zhubrin, S.
Predicting contaminants and oil dispersion with a simulation tool
(2002) World Petroleum Congress Proceedings, 2, p. 573.

Wu, X.Z., Hwang, W.S., Chen, C.W., Liu, S.H.
The application of two phase flow simulation to the development of direct iron ore smelting reduction process
(2002) International Journal of Cast Metals Research, 15 (4 SPEC.), pp. 491-496. 

Song, K.D., Lee, B.Y., Park, K.Y., Park, J.H.
Analysis of dielectric recovery for SF6 gas-blast arc
(2002) Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 41 (11), pp. 6541-6549. 

Yagi, Y., Murase, M., Nakamura, A., Fujii, Y.
Two phase flow analysis for secondary side in steam generator
(2002) International Conference on Nuclear Engineering, Proceedings, ICONE, 3, pp. 105-113. 

Yoon, C., Rhee, B.W., Min, B.-J.
Validation of a CFD analysis model for predicting CANDU-6 moderator temperature against SPEL experiments
(2002) International Conference on Nuclear Engineering, Proceedings, ICONE, 3, pp. 131-138. 

Aldas, K., Mat, M.D., Kaplan, Y.
A three-dimensional mathematical model for absorption in a metal hydride bed
(2002) International Journal of Hydrogen Energy, 27 (10), pp. 1049-1056. 

Hudson, N., Bhavnani, S.H., Overfelt, R.A.
Computational fluid-dynamics modeling of the hydrodynamics of fluidization in the sand surrounding a lost-foam casting pattern
(2002) Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 33 (4), pp. 565-575. 

Dong, H.-G., Gao, H.-M., Wu, L.
Numerical simulation of heat transfer based on PHOENICS during stationary plasma arc welding process
(2002) Hanjie Xuebao/Transactions of the China Welding Institution, 23 (4), pp. 24-26+30. 

Ma, X., Su, J., Jin, S., Yu, G., Hou, J., Zhao, L.
Numerical simulation of turbulent flow during mold filling
(2002) Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 38 (8), pp. 126-129. 

Moureh, J., Laguerre, O., Flick, D., Commere, B.
Analysis of use of insulating pallet covers for shipping heat-sensitive foodstuffs in ambient conditions
(2002) Computers and Electronics in Agriculture, 34 (1-3), pp. 89-109. 

Ghani, A.G.A., Farid, M.M., Chen, X.D.
Theoretical and experimental investigation of the thermal destruction of Vitamin C in food pouches
(2002) Computers and Electronics in Agriculture, 34 (1-3), pp. 129-143. 

Xie, H., Zhou, Z.
Numerical analysis on performance of passive heat removal from high temperature gas-cooled reactor using phoenics
(2002) International Communications in Heat and Mass Transfer, 29 (4), pp. 557-566. 

Wang, X., Wang, W., Wang, D., Wang, J.
Temperature fields in automotive catalytic converters
(2002) Qinghua Daxue Xuebao/Journal of Tsinghua University, 42 (5), pp. 669-672. 

Heng, X., Zuying, G., Zhiwei, Z.
A numerical investigation of natural convection heat transfer in horizontal spent-fuel storage cask
(2002) Nuclear Engineering and Design, 213 (1), pp. 59-65. 

Mäki, A.M., Österman, P.J., Luomala, M.J.
Numerical study of the pusher-type slab reheating furnace
(2002) Scandinavian Journal of Metallurgy, 31 (2), pp. 81-87. 

Phillips, D.G., Richards, P.J., Flay, R.G.J.
CFD modelling and the development of the diffuser augmented wind turbine
(2002) Wind and Structures, An International Journal, 5 (2-4), pp. 267-276. 

Richards, P.J., Mallinson, G.D., McMillan, D., Li, Y.F.
Pedestrian level wind speeds in downtown Auckland
(2002) Wind and Structures, An International Journal, 5 (2-4), pp. 151-164. 

Kopaç, M.
Effect of plate spacing of impingement air jet on flow and heat transfer characteristics
(2002) Mathematical and Computational Applications, 7 (2), pp. 171-179. 

Abdul Ghani, A.G., Farid, M.M., Chen, X.D.
Numerical simulation of transient temperature and velocity profiles in a horizontal can during sterilization using computational fluid dynamics
(2002) Journal of Food Engineering, 51 (1), pp. 77-83. 

Abdul Ghani, A.G., Farid, M.M., Chen, X.D.
A CFD study on thermal sterilization of food in pouches
(2001) Acta Horticulturae, 566, pp. 397-405.

Bolot, R., Bonnet, R., Jandin, G., Coddet, C.
Application of CAD to CFD for the Wire Arc Spray Process
(2001) Proceedings of the International Thermal Spray Conference, pp. 889-894. 

Phan, B.D., Roberts, E.P.L., Hayes, P.J., Wright, N.P.
Atmospheric pressure plasma surface treatment of ceramic filter materials
(2001) Computational and Experimental Methods, 6, pp. 377-386. 

Hudson, N., Bhavnani, S.H., Overfelt, R.A.
CFD modeling of the hydrodynamics of fluidization in the sand surrounding a lost foam casting pattern
(2001) Proceedings of the Conference on Computational Modeling of Materials, Minerals and Metals Processing, pp. 115-128. 

Potočnik, V., Laroche, F.
Comparison of measured and calculated metal pad velocities for different prebake cell designs
(2001) Light Metals: Proceedings of Sessions, TMS Annual Meeting (Warrendale, Pennsylvania), pp. 419-425. 

Xie, H., Gao, Z.-Y.
Computational study of NHR-200 on asymmetric operation conditions
(2001) Hedongli Gongcheng/Nuclear Power Engineering, 22 (6), pp. 542-546. 

Bolot, R., Monin, V., Coddet, C.
Correlation Between Simulations and Plasma Sprayed Coatings Properties
(2001) Proceedings of the International Thermal Spray Conference, pp. 883-888. 

Zakhia, N.Z.
Flow characterization of slush hydrogen in transfer lines
(2001) Proceedings of the National Heat Transfer Conference, 1, pp. 585-593. 

Narayanan, V., Kishore Kumar, S., Venkatakrishnaiah, T., Kaushal, S.C.
Flow prediction in the intermediate casing of compressors
(2001) 37th Joint Propulsion Conference and Exhibit, . 

Wang, D., Wang, W., Wu, X., Wang, J.
Influence of monolith catalyst configuration on gas flow uniformity in automotive catalytic converter
(2001) Proceedings of the International Conference on Energy Conversion and Application (ICECA'2001), pp. 909-913. 

Travkin, V.S., Sergievsky, E.D., Krinitsky, E.V., Catton, I.
Integrated Heterogeneous Design of Semiconductor Heat Sink via Scaled Direct Micro-Modeling, Upper Scale VAT Simulation and Experiment. Comparison and Verification of Properties
(2001) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 369 (7), pp. 75-80. 

Bolot, R., Planche, M.P., Coddet, C.
Modeling of the Natural Gas HVOF Process
(2001) Proceedings of the International Thermal Spray Conference, pp. 911-916. 

An, M., Thompson, W., Wright, M., Agranat, V., Kawaji, M., Chan, A.M.C.
Phoenics simulations of gas-liquid flows in large piping components related to nuclear safety assessment
(2001) American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 424 2, pp. 213-223. 

Abdul Ghani, A.G., Farid, M.M., Chen, X.D., Richards, P.
A computational fluid dynamics study on the effect of sterilization temperatures on bacteria deactivation and vitamin destruction
(2001) Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 215 (1), pp. 9-17. 

Von Klose, W., Schinkel, A.-P.
Modelling of the carbonization of renewable raw materials in a baffleless rotary kiln [Modellierung der karbonisierung nachwachsender rohstoffe im einbatenlosen Drehrohrreaktor]
(2001) Erdoel Erdgas Kohle, 117 (7-8), pp. 358-361. 

Tzeng, P.Y., Liu, C.H., Hsu, K.W.
Numerical simulation on flow in pressure atomizers for gas turbine engines
(2001) Chung Cheng Ling Hsueh Pao/Journal of Chung Cheng Institute of Technology, 29 (2), pp. 91-100. 

Abdul Ghani, A.G., Farid, M.M., Chen, X.D., Richards, P.
Thermal sterilization of canned food in a 3-D pouch using computational fluid dynamics
(2001) Journal of Food Engineering, 48 (2), pp. 147-156. 

Theiler, T., Sacher, N., Froeschle, B.
TiN barriers for high-k capacitors: Simulations and experimental results
(2001) Microelectronic Engineering, 56 (1-2), pp. 181-185. 

Bolot, R., Imbert, M., Coddet, C.
On the use of a low-Reynolds extensions to the Chen-Kim (κ-ε) model to predict thermal exchanges in the case of an impinging plasma jet
(2001) International Journal of Heat and Mass Transfer, 44 (6), pp. 1095-1106. 

Jiang, P.X., Ren, Z.P., Jiang, J.Y., Chen, M.H., Lu, G.E.
Analysis of the temperature variation and the safety of ammunition stored in a stack of cases
(2001) Qinghua Daxue Xuebao/Journal of Tsinghua University, 41 (4), pp. 131-135. 

Pinto, J.C.
Prediction of the spatial distribution of the average molecular weights in living polymerisation reactors using CFD methods
(2001) Macromolecular Theory and Simulations, 10 (2), pp. 123-135. 

Xie, H., Gao, Z.Y.
Numerical analysis of three-dimensional convective heat transfer in the core bypass of the nuclear heating reactor NHR-200
(2001) Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 35 (2), pp. 147-152. 

Mehedinteanu, S.
Application of the new way to prevent core melting in pressure tube reactors (CANDU type)
(2001) Annals of Nuclear Energy, 28 (1), pp. 79-88. 

Zou, D.N., Lei, Y.P., Su, J.Y.
Numerical simulation on heat transfer and fluid flow phenomena in laser surface remelting process
(2001) Zhongguo Jiguang/Chinese Journal of Lasers, 28 (1), pp. 81-84. 

Helsen, L.M.L., Van Den Bulck, E.V.M.
Study of a new macro-particle model for the low-temperature pyrolysis of dried wood chips
(2001) Heat and Mass Transfer/Waerme- und Stoffuebertragung, 38 (1), pp. 165-181. 

Gruen, G.-U., Buchholz, A., Mortensen, D.
3-D modeling of fluid flow and heat transfer during the DC casting process - Influence of flow modeling approach
(2000) Light Metals: Proceedings of Sessions, TMS Annual Meeting (Warrendale, Pennsylvania), pp. 573-578. 

Reichrath, S., Ferioli, F., Davies, T.W.
A simple computational fluid dynamics (CFD) model of a tomato glasshouse
(2000) Acta Horticulturae, 534, pp. 197-204. 

Jalili, V., Patel, M.K., Bailey, C.
Application of CFD in designing spacers: A novel approach
(2000) American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, 48, pp. 235-236. 

Badran, O.O., Holdo, A.E., Al-Far, S., Nilsen, H.
CFD studies on ballast water separators
(2000) American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 431, pp. 17-20. 

Hanson, R., Patel, M.K.
Development of a model to predict the life of pneumatic conveyor bends subject to erosive wear
(2000) American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 253, pp. 967-975. 

Schmidtke, O., Hapke, J.
Mass and heat transfer in connection with the storage of hydrogen in metal hydrides
(2000) Computational Studies, 3, pp. 53-62. 

Wei, Z.-J., Zhang, P.
Numerical simulation of air flow field in a cyclone dust separator
(2000) Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology, 20 (5), pp. 561-564. 

Keating, A., Nešić, S.
Particle tracking and erosion prediction in three-dimensional bends
(2000) American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 253, pp. 993-999. 

Shilton, A.
Potential application of computational fluid dynamics to pond design
(2000) Water Science and Technology, 42 (10-11), pp. 327-334. 

Moureh, J., Derens, E.
Numerical modelling of the temperature increase in frozen food packaged in pallets in the distribution chain
(2000) International Journal of Refrigeration, 23 (7), pp. 540-552. 

Papakonstantinou, K.A., Kiranoudis, C.T., Markatos, N.C.
Numerical simulation of volatile organic compounds evaporation in closed spaces
(2000) Drying Technology, 18 (10), pp. 2203-2216. 

Narabayashi, T., Mori, M., Nakamaru, M., Ohmori, S.
Study on two-phase flow dynamics in steam injectors: II. High-pressure tests using scale-models
(2000) Nuclear Engineering and Design, 200 (1), pp. 261-271.

Solhed, H., Alexis, J., Sjöström, U., Yuan, S.D., Jonsson, L.
Application of mathematical modelling at MEFOS to improve metallurgical processes
(2000) Scandinavian Journal of Metallurgy, 29 (3), pp. 127-138. 

Ma, F., Wen, G., Li, G.
Numerical simulation on fluid flow in mould for slab continuous casting
(2000) Jinshu Xuebao/Acta Metallurgica Sinica, 36 (4), pp. 399-402. 

Otte, S., Schmidt, W.
Process equipment innovation in economical working small plants for thermal waste treatment [Wirtschaftliche Thermische Abfallbehandlung in Kleinanlagen mit innovativen Verfahrenselementen]
(2000) Chemische Technik (Leipzig), 52 (2), pp. 61-65.

Hu, J., Rivin, B., Sher, E.
The effect of an electric field on the shape of co-flowing and candle-type methane-air flames
(2000) Experimental Thermal and Fluid Science, 21 (1-3), pp. 124-133. 

Chuang, S.-H., Nieh, T.-J.
Numerical simulation and analysis of three-dimensional turbulent impinging square twin-jet flow field with no-crossflow
(2000) International Journal for Numerical Methods in Fluids, 33 (4), pp. 475-498. 

Kostikov, A.O.
Use of the PHOENICS program complex of solution of heat mass transfer problems for the determination of a heat emission coefficient
(2000) Engineering Simulation, 17 (2), pp. 271-280. 

Marsalek, P.M., Watt, W.E., Marsalek, J., Anderson, B.C.
Winter flow dynamics of an on-stream stormwater management pond
(2000) Water Quality Research Journal of Canada, 35 (3), pp. 505-523. 

Chew, M.Y.L., Lim, S.H.
A computational fluid dynamic simulation study of a smoke extract system in an underground transit station
(1999) Journal of Applied Fire Science, 9 (3), pp. 251-273. 

Choi, H.L., Song, J.I., An, H.K.
Better Housing for Effective Pig Production
(1999) Asian-Australasian Journal of Animal Sciences, 12 (8), pp. 1310-1315. 

Mufuta M. B., J.-M.
Comparison of experimental values and numerical simulation on a set-up simulating the cross-section of a disc-type transformer
(1999) International Journal of Thermal Sciences, 38 (5), pp. 424-435. 

Um, Ki-Young, Han, Ki-Gwan, Lee, Jong-Moo, Kwon, Soon-Chang, Lee, Eun-Ah, Lee, Hwang-Jin, Noh, Min-Soo, Yoo, Tae-Kyung
Development of high power laser diode
(1999) Pacific Rim Conference on Lasers and Electro-Optics, CLEO - Technical Digest, 2, pp. 225-226. 

Hu, J., Rivin, B., Sher, E.
Experimental and numerical study of the effect of an electric field on a Bunsen-type flame
(1999) Israel Journal of Chemistry, 39 (1), pp. 87-96. 

Abdul Ghani, A.G., Farid, M.M., Chen, X.D., Richards, P.
Investigation of deactivation of bacteria in a canned liquid food during sterilization using computational fluid dynamics (CFD)
(1999) Journal of Food Engineering, 42 (4), pp. 207-214. 

Ghiaus, A.-G., Margaris, D.P., Papanikas, D.G.
Modelling and experimentation in drying of thermolabile products
(1999) Physics and Modern Topics in Mechanical and Electrical Engineering, pp. 159-164. 

Jalili, V., Patel, M.K., Bailey, C.
Numerical modelling of inhaler spacers: A novel study
(1999) Proceedings of the 1999 3rd ASME/JSME Joint Fluids Engineering Conference, FEDSM'99, San Francisco, California, USA, 18-23 July 1999 (CD-ROM), p. 1. 

Wolf, H., Röber, J., Riedel, S., Streiter, R., Gessner, T.
Process and equipment simulation of copper chemical vapor deposition using Cu(hfac)vtms
(1999) Microelectronic Engineering, 45 (1), pp. 15-27. 

Liu, X., Zhuo, Z., Huang, Y.
Study on a centrifugal superfine air classifier - flow-fields in the cavity of classifier
(1999) Huaxue Gongcheng/Chemical Engineering, 27 (6), pp. 35-38. 

Yan, J.D., Fang, M.T.C., Hall, W.
The development of PC based CAD tools for auto-expansion circuit breaker design
(1999) IEEE Transactions on Power Delivery, 14 (1), pp. 176-181. 

NguyenLe, Q., Ishii, M.
Theoretical and numerical investigation of turbulent steam jets in BWR steam blowdown
(1999) American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 396, pp. 41-50. 

Medved, Saso, Novak, Peter
Thermal insulation, shading and ventilation of transparent building envelope with a double cavity and siphon
(1999) Strojarstvo, 41 (1), pp. 19-26. 

Nguyenle, Q., Ishii, M.
Three dimensional analysis of turbulent steam jets in enclosed structures: A CFD approach
(1999) American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 397 II, pp. 81-88. 

Dinu, C.A., Beasley, D.E.
Transport processes for a row of confined jets impinging on a moving surface
(1999) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 364-3, pp. 273-281. 

Karama, A.B., Onyejekwe, O.O., Brouckaert, C.J., Buckley, C.A.
The use of computational fluid dynamics (CFD). Technique for evaluating the efficiency of an activated sludge reactor
(1999) Water Science and Technology, 39 (10-11), pp. 329-332. 

Otto, T., Wolf, H., Streiter, R., Dehoff, A., Wandel, K., Gessner, T.
Process and equipment simulation of dry silicon etching in the absence of ion bombardment
(1999) Microelectronic Engineering, 45 (4), pp. 377-391. 

Abdul Ghani, A.G., Farid, M.M., Chen, X.D., Richards, P.
Numerical simulation of natural convection heating of canned food by computational fluid dynamics
(1999) Journal of Food Engineering, 41 (1), pp. 55-64. 

Halupovich, Y., Natan, B., Rom, J.
Numerical solution of the turbulent supersonic flow over a backward facing step
(1999) Fluid Dynamics Research, 24 (5), pp. 251-273. 

Jiang, Peixue, Pan, Yi, Ren, Zepei
Natural convection heat transfer of water at super-critical pressures in a horizontal annulus
(1999) Qinghua Daxue Xuebao/Journal of Tsinghua University, 39 (4), pp. 108-112. 

De Cock, W., Blom, P., Vaes, G., Berlamont, J.
The feasibility of flocculation in a storage sedimentation basin
(1999) Water Science and Technology, 39 (2), pp. 75-83. 

Schaer, E., Guichardon, P., Falk, L., Plasari, E.
Determination of local energy dissipation rates in impinging jets by a chemical reaction method
(1999) Chemical Engineering Journal, 72 (2), pp. 125-138. 

Sipavichius, Ch., Shlezhas, R., Vaitekunas, P.
Investigation of gas stream outflow from conical nozzles in process of laser cutting
(1999) Proceedings of SPIE - The International Society for Optical Engineering, 3688, pp. 144-151. 

Poscher, S., Lehnert, W., Ryssel, H.
Simulation of a coating protection for an in situ ellipsometer in a CVD furnace
(1999) European Solid-State Device Research Conference, 13-15 Sept. 1999, art. no. 1505593, pp. 676-679. 

Yan, J.D., Fang, M.T.C.
Visualization of arcing process in an auto-expansion circuit breaker
(1999) IEEE Transactions on Plasma Science, 27 (1), pp. 40-41. 

Richards, P.J., Mallinson, G.D.
Computational modelling and flow visualisation of wind flow over Downtown Auckland
(1998) Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998, pp. 417-420. 

Phillips, D.G., Richards, P.J., Mallinson, G.D., Flay, R.G.J.
Computational modelling of diffuser designs for a diffuser augmented wind turbine
(1998) Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998, pp. 207-210. 

Poscher, S., Theiler, T.
Coupled simulation of gas flow and heat transfer in an RTF-system with rotating wafer
(1998) Materials Science in Semiconductor Processing, 1 (3-4), pp. 201-205. 

Gehring, R., Dutz, H., Bradtke, Ch., Goertz, St., Meyer, W., Plückthun, M., Reicherz, G., Thomas, A., Werth, H.
First use of an internal superconducting 'holding magnet' in an η-photoproduction experiment
(1998) Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 418 (2-3), pp. 233-240. 

Graovac, M., Dawson, F.P., Fila, M., Cormack, D.E.
Fluorescent lamp cold environment performance improvement
(1998) Conference Record - IAS Annual Meeting (IEEE Industry Applications Society), 3, pp. 2158-2163.

Medved, S., Novak, P.
Heat Transfer Through a Double Cavity with Siphon [Prehod toplote skozi dvojno rego s sifonom]
(1998) Strojniski Vestnik/Journal of Mechanical Engineering, 44 (3-4), pp. 71-83. 

Bock, A., Anton, G., Beulertz, W., Bradtke, Chr., Dutz, H., Gehring, R., Goertz, S., Helbing, K., Hey, J., Meyer, W., Plückthun, M., Reicherz, G., Sözüer, L., Breuer, M., Didelez, J.P., Hoffmann-Rothe, P.
Measurement of the target asymmetry of η and π0 photoproduction on the proton
(1998) Physical Review Letters, 81 (3), pp. 534-537. 

Liang, Taofeng, Wang, Zhou, Yang, Xianyong
Numerical simulation for conjugated problems of conduction, convection and radiation in an annular space
(1998) Qinghua Daxue Xuebao/Journal of Tsinghua University, 38 (5), pp. 46-49.

Wang, R., Shen, Z.
Numerical simulation of swirling jet in flow field at bottomhole
(1998) Journal of the University of Petroleum, China (Natural Science Edition), 22 (6), pp. 46-49. 

Eichert, P., Imbert, M., Coddet, C.
Numerical Study of an ArH2 Gas Mixture Flowing Inside and Outside a dc Plasma Torch
(1998) Journal of Thermal Spray Technology, 7 (4), pp. 505-512. 

Noh, H.-K., Song, K.-S.
Temperature Distribution of a Low Temperature Heat Pipe with Multiple Heaters for Electronic Cooling
(1998) ETRI Journal, 20 (4), pp. 380-394. 

Martynowicz, E.T.M.J., Kitano, K., Sakuraya, T.
The modeling of the combustion of interacting fuel droplet arrays
(1998) American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 377 I, pp. 61-67. 

Cheng, X., Zhang, Z., Fu, Z.
Turbulent flow in flow distributing equipment simulated by using PHOENICS
(1998) Beijing Huagong Daxue Xuebao(Ziran Kexueban)/Journal of Beijing University of Chemical Technology, 25 (1), pp. X3-19. 

Medved, S., Novak, P.
Heat transfer through a double pane window with an insulation screen open at the top
(1998) Energy and Buildings, 28 (3), pp. 257-268. 

Vaarno, J., Pitkälä, J., Ahokainen, T., Jokilaakso, A.
Modelling gas injection of a Peirce-Smith-converter
(1998) Applied Mathematical Modelling, 22 (11), pp. 907-920. 

Hassan, A.A., Crowther, J.M.
Modelling of fluid flow and pollutant dispersion in a street canyon
(1998) Environmental Monitoring and Assessment, 52 (1-2), pp. 281-297. 

Ahokainen, T., Jokilaakso, A.
Numerical Simulation of the Outokumpu Flash Smelting Furnace Reaction Shaft
(1998) Canadian Metallurgical Quarterly, 37 (3-4), pp. 275-283. 

Proceedings of the 1996 Symposium on the Computational Fluid Dynamics and Heat/Mass Transfer Modeling (CFD and HMTM) in the Metallurgical Industry
(1998) Canadian Metallurgical Quarterly, 37 (3-4), pp. 167-342. 

Kim, I.S., Basu, A.
A mathematical model of heat transfer and fluid flow in the gas metal arc welding process
(1998) Journal of Materials Processing Technology, 300 (3-4), pp. 17-24. 

Laslandes, S., Sacré, C.
Transport of particles by a turbulent flow around an obstacle-a numerical and a wind tunnel approach
(1998) Journal of Wind Engineering and Industrial Aerodynamics, 74-76, pp. 577-587. 

Meyer, W.
Eta-photoproduction from polarized protons at ELSA
(1998) Nuclear Physics A, 629 (1-2), pp. 286c-289c. 

Yang, Y., Jokilaakso, A., Jarvi, J., Makela, P.
Gas flow and cooling in waste-heat boilers in the Outokumpu flash smelting process
(1998) TMS Annual Meeting, pp. 417-431. 

Bockel, S., Belmonte, T., Michel, H., Ablitzer, D.
3D modeling of a microwave post-discharge nitriding reactor
(1997) Surface and Coatings Technology, 97 (1-3), pp. 618-625. 

Tucker, P.G.
CFD applied to electronic systems: A review
(1997) IEEE Transactions on Components Packaging and Manufacturing Technology Part A, 20 (4), pp. 518-529. 

Huang, L.Y., Wen, J.X., Karayiannis, T.G., Matthews, R.D.
CFD modelling of heat transfer in condensing heat exchangers
(1997) International Journal of Heat and Technology, 15 (1), pp. 23-30. 

Popovska, N., Gerhard, H., Wurm, D., Poscher, S., Emig, G., Singer, R.F.
Chemical vapor deposition of titanium nitride on carbon fibres as a protective layer in metal matrix composites
(1997) Materials and Design, 18 (4-6), pp. 239-242. 

Harral, B.B., Boon, C.R.
Comparison of predicted and measured air flow patterns in a mechanically ventilated livestock building without animals
(1997) Journal of Agricultural Engineering Research, 66 (3), pp. 221-228. 

Fraser, S.M., Abdel Razck, A.M., Abdullah, M.Z.
Computational and experimental investigations in a cyclone dust separator
(1997) Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 211 (4), pp. 247-257. 

Hu, W., Lavers, J.D.
Coupled electro-thermal-flow model for very long electric arcs
(1997) IEEE Transactions on Magnetics, 33 (2 PART 2), pp. 1726-1729. 

Domgin, J.F., Huilier, D., Burnage, H., Gardin, P.
Coupling of a Lagrangian model with a CFD code: Application to the numerical modelling of the turbulent dispersion of droplets in a turbulent pipe flow
(1997) Journal of Hydraulic Research, 35 (4), pp. 473-488. 

Mann, R., Togatorop, A., Senior, P.R., Graham, P., Edwards, R.B.
Evaluating mixing in stirred reactors by 3-D visualization: Partial segregation for dual-feed semi-batch operation
(1997) Chemical Engineering Research and Design, 75 (8), pp. 755-762. 

Sarkar, T., Sayer, P.G., Fraser, S.M.
Flow simulation past axisymmetric bodies using four different turbulence models
(1997) Applied Mathematical Modelling, 21 (12), pp. 783-792. 

Hodson, J.S., Fletcher, J.P., Porter, K.E.
Fluid mechanical studies of structured distillation packings
(1997) Institution of Chemical Engineers Symposium Series, (142 pt 2), pp. 999-1007. 

Freeman, David J.
Interfacing virtual reality, CFD and the Internet
(1997) American Society of Mechanical Engineers (Paper), 8 p. 

Lepski, D., Kusch, H.-G., Reitzenstein, W.
Modelling of diffusion controlled moving boundary processes during the laser remelting of ferritic nodular cast iron: Carbon diffusion in laser remelting
(1997) Lasers in Engineering, 5 (4), pp. 247-274. 

Gango, P.
Numerical boron mixing studies for Loviisa nuclear power plant
(1997) Nuclear Engineering and Design, 177 (1-3), pp. 239-254. 

Delaunay, D., Flori, J.P., Sacré, C.
Numerical modelling of gas dispersion from road tunnels in urban environments: Comparison with field experiment data
(1997) International Journal of Environment and Pollution, 8 (3-6), pp. 690-698. 

Yan, Z., Tao, Z.
Numerical solution of heat transfer and fluid flow on nonstaggered grids
(1997) Tuijin Jishu/Journal of Propulsion Technology, 18 (5), pp. 69-77. 

Yan, Zexiang, Tao, Zhi
Numerical solution of neat transfer and fluid flow on nonstaggered grids
(1997) Tuijin Jishu/Journal of Propulsion Technology, 18 (5), pp. 73-77. 

Luoma, M., Härkönen, M., Lylykangas, R., Sohlo, J.
Optimization of the metallic three-way catalyst behavior
(1997) SAE Technical Papers, . 

Proceedings of the 1997 E-MRS Spring Meeting
(1997) Materials and Design, 18 (4-6), pp. 203-414. 

Steady-state waste combustion and air flow optimization in a field scale rotary kiln
(1997) Environmental Engineering Science, 14 (1), pp. 43-54. 

Chow, W.K.
Studies on the stability of thermal stratified layer in a forced-ventilation fire using computational fluid dynamics
(1997) Journal of Applied Fire Science, 6 (1), pp. 15-25. 

Chang, Y.P., Tsai, R.
Natural convection in a square enclosure with a cold source
(1997) International Communications in Heat and Mass Transfer, 24 (7), pp. 1019-1027. 

Narabayashi, T., Mizumachi, W., Mori, M.
Study on two-phase flow dynamics in steam injectors
(1997) Nuclear Engineering and Design, 175 (1-2), pp. 147-156. 

Ang, K.C., Mazumdar, J., Craig, I.Hamilton
Computational model for blood flow through highly curved arteries with asymmetric stenoses
(1997) Australasian Physical and Engineering Sciences in Medicine, 20 (3), pp. [d]152-163. 

Buchanan, J.L., McKown, C.
Off-line sheet glass coating system
(1997) Journal of Non-Crystalline Solids, 218, pp. 179-184. 

Mailutha, J.T., Honami, N., Murase, H., Inoti, I.K.
Knowledge engineering-based studies on solar energy utilization in Kenya: Part III
(1997) AMA, Agricultural Mechanization in Asia, Africa and Latin America, 28 (3), pp. 61-67. 

Robertson, A.P., Hoxey, R.P., Richards, P.J., Ferguson, W.A.
Full-scale measurements and computational predictions of wind loads on free-standing walls
(1997) Journal of Wind Engineering and Industrial Aerodynamics, 67-68, pp. 639-646. 

Kleinig, A.R., Middleberg, A.P.J.
Numerical and experimental study of a homogenizer impinging jet
(1997) AIChE Journal, 43 (4), pp. 1100-1107. 

Papamichael, H., Pellon, C., Miaoulis, I.N.
Air flow patterns in the optical fibre drawing furnace
(1997) Glass Technology, 38 (1), pp. 22-29. 

Tieu, A.K., Kim, I.S.
Simulation of the continuous casting process by a mathematical model
(1997) International Journal of Mechanical Sciences, 39 (2), pp. 185-192. 

Domgin, Jean-Francois, Gardin, Pascal, Huilier, Daniel G.F., Burnage, Henri
Application of an Eulerian-Lagrangian model to the turbulent dispersion of particles in turbulent pipe flows
(1997) American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 17, pp. 7pp. 

Hadjerioua, Boualem, Lindquist, Katherine F., Proctor, William D., Killen, Christopher R.
Evaluation of hydro projects operational changes on Colbert Fossil Plant water intake temperature
(1997) Proceedings of the International Conference on Hydropower - Waterpower, 3, pp. 1858-1867. 

Freeman, D.J.
Interfacing virtual reality, CFD and the internet
(1997) Proceedings of the ASME Turbo Expo, . 

Ang, K.C., Mazumdar, J.N.
Mathematical modelling of three-dimensional flow through an asymmetric arterial stenosis
(1997) Mathematical and Computer Modelling, 25 (1), pp. 19-29. 

Jiang, Yong, Yeo, Joon Hock, Liu, Chang Yu
Numerical and experimental study on fluid flow through bileaflet valves in a rigid 2-D aortic model
(1997) American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 21, pp. 9pp.

Boisson, N., Malin, M.R.
Numerical prediction of two-phase flow in bubble columns
(1996) International Journal for Numerical Methods in Fluids, 23 (12), pp. 1289-1310. 

Kuijlaars, K.J., Kleijn, C.R., Van Den Akker, H.E.A.
Modeling of selective tungsten low-pressure chemical vapor deposition
(1996) Thin Solid Films, 290-291, pp. 406-410. 

Baskaya, S., Gilchrist, A., Fraser, S.M.
Buoyancy-induced flow through a narrow chamber containing an internal heat source : Comparison of experimental measurements and numerical simulations
(1996) Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 210 (5), pp. 489-498. 

Wang, W., Davies, G.A.
CFD studies of separation of mists from gases using vane-type separators
(1996) Chemical Engineering Research and Design, 74 (2), pp. 232-238. 

Knowles, K.
Computational studies of impinging jets using k-ε turbulence models
(1996) International Journal for Numerical Methods in Fluids, 22 (8), pp. 799-810. 

Yongxiang, Yang
Computer simulation of gas flow and heat transfer in waste-heat boilers of the Outokumpu copper flash smelting process
(1996) Acta Polytechnica Scandinavica, Chemical Technology and Metallurgy Series, (242), pp. 2-134. 

Yang, Y.
Computer simulation of gas flow and heat transfer in waste-heat boilers of the outokumpu copper flash smelting process
(1996) Acta Polytechnica Scandinavica, Chemical Technology Series, (242), pp. X-135.

Moureh, J., Ding, Y., Flick, D.
Experimental and numerical caracterization of heat transfer through a plan horizontal air jet [Caractérisation expérimentale et numérique des transferts de chaleur à travers un jet d'air plan horizontal]
(1996) Revue Generale de Thermique, 35 (415), pp. 469-474. 

Moureh, J., Flick, D., Lema Larrieu, P.
Hydrodynamic and thermal study of a conical rotating heat exchanger [Etude hydrodynamique et thermique d'un échangeur de chaleur à noyau tournant conique]
(1996) Revue Generale de Thermique, 35 (414), pp. 402-407. 

Cha, P.-R., Hwang, Y.-S., Oh, Y.-J., Chung, S.H., Yoon, J.-K.
Numerical analysis on cold crucible using 3D H-φ method and finite volume method with non-staggered BFC grid system
(1996) ISIJ International, 36 (9), pp. 1157-1166. 

Dargent, C., Grazzini, F., George, J., Dartus, D.
Numerical simulation of the vortex shedding around a square cylinder
(1996) International Conference on Air Pollution - Proceedings, pp. 257-266. 

Wen, J.X., Huang, L.Y.
Numerical study of a condensing boiler heat exchanger
(1996) International Symposium on Heat Transfer, pp. 591-596. 

On the mixture model for multiphase flow
(1996) VTT Publications, (288), pp. 3-67. 

Björkman, J., Keski-Rahkonen, O.
Simulation of the steckler room fire expenment by using SOFIE CFD-model
(1996) VTT Publications, (265), pp. 3-28. 

Kleinig, A.R., Middelberg, A.P.J.
The correlation of cell distribution with homogenizer valve pressure gradient determined by computational fluid dynamics
(1996) Chemical Engineering Science, 51 (23), pp. 5103-5110. 

Berbente, C., Zancu, S.
Theoretical investigations of flows through single-sided sudden expansion
(1996) UPB Scientific Bulletin, Series A: Applied Mathematics and Physics, 57-58 (1-4), pp. 84-92. 

Mailutha, J.T., Murase, H., Honami, N.
Use of computational flow dynamics code for modeling the behaviour of airborne dust on the surface of solar cell for maximizing solar energy for controlled environment
(1996) Acta Horticulturae, 440, pp. 320-325. 

Delaunay, D.
Numerical simulation of atmospheric dispersion in an urban site: Comparison with field data
(1996) Journal of Wind Engineering and Industrial Aerodynamics, 64 (2-3), pp. 221-231. 

Yu, G., Zhang, Z., Lessmann, R.
Computer simulation of the flow field and particle deposition by diffusion in a 3-D human airway bifurcation
(1996) Aerosol Science and Technology, 25 (3), pp. 338-352. 

Chow, W.K.
Design of ventilation system in a big enclosed car park using computational fluid dynamics
(1996) Architectural Science Review, 39 (3), pp. 141-146. 

Dutz, H., Krämer, D., Zucht, B., Althoff, K.H., Anton, G., Arends, J., Beulertz, W., Bock, A., Breuer, M., Gehring, R., Gemander, M., Goertz, S., Helbing, K., Hey, J., Meyer, W., Nöldeke, G., Paulsen, R., Reicherz, G., Thomas, A., Wartenberg, S.
Photoproduction of positive pions from polarized protons
(1996) Nuclear Physics A, 601 (3-4), pp. 319-332. 

Chen, G.-R., Shaw, H.-J.
Computation of three-dimensional jet-flapped wing in viscous flow
(1996) Transactions of the Japan Society for Aeronautical and Space Sciences, 39 (123), pp. 126-141. 

Werner, C., Ilg, M., Uram, K.
Three-dimensional equipment modeling for chemical vapor deposition
(1996) Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 14 (3), pp. 1147-1151. 

Hsiun, C.-M., Chen, C.-K.
Aerodynamic characteristics of a two-dimensional airfoil with ground effect
(1996) Journal of Aircraft, 33 (2), pp. 386-392. 

Olika, B., Pan, Y., Björkman, B., Grip, C.E.
Numerical simulation and industrial investigation on the melt stratification phenomena in ladles holding molten steel
(1996) Scandinavian Journal of Metallurgy, 25 (1), pp. 18-26. 

Tan, F.L., Fok, S.C.
Visualization of the casting process through computer animation
(1996) Journal of Materials Processing Technology, 57 (1-2), pp. 201-205. 

Ravnikar, Igor, Petelin, Stojan
3D calculation of boiling in complex geometry of steam generator
(1996) Proceedings of the American Power Conference, 2, pp. 783-788. 

Zhou, Dadong, Wang, Ting, Ryan, William R.
Cold flow computations for the diffuser-combustor section of an industrial gas turbine
(1996) American Society of Mechanical Engineers (Paper), pp. 9pp. 

Zhou, D., Wang, T., Ryan, W.R.
Cold flow computations for the diffuser-combustor section of an industrial gas turbine
(1996) ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996, 3, . 

Sipavichyus, Ch., Vaitiekunas, P., Milutis, E.
Determination of critical characteristics of gas jet under finishing laser cutting
(1996) Proceedings of SPIE - The International Society for Optical Engineering, 2713, pp. 259-266. 

van den Berghe, C.S., Baltas, N.D.
DAP Phoenics: Porting a CFD code to a SIMD computer
(1995) Simulation Practice and Theory, 3 (4-5), pp. 239-256. 

Ravnikar, I., Petelin, S.
3D model of steam generator of nuclear power plant Krsko
(1995) Proceedings of the Meeting on Nuclear Energy: Central Europe: Present and Perspectives, pp. 464-471. 

Monclova, L.A., Forney, L.J.
Numerical simulation of a pipeline tee mixer
(1995) Industrial and Engineering Chemistry Research, 34 (4), pp. 1488-1493. 

Pritchard, J., Nurnberg, G., Shoukri, M.
Design optimization of high pressure quench vacuum furnaces through computer modelling
(1995) Industrial Heating, 62 (9), pp. 57-60. 

Dutta, Sandip, Andrews, Malcolm J., Han, Je-Chin
Simulation of turbulent heat transfer in a rotating duct
(1995) Journal of thermophysics and heat transfer, 9 (2), pp. 381-382. 

Reicherz, G., Bradtke, C., Dutz, H., Gehring, R.M., Goertz, S., Krämer, D., Meyer, W., Plückthun, M., Thomas, A.
The Bonn polarized target NMR-system
(1995) Nuclear Inst. and Methods in Physics Research, A, 356 (1), pp. 74-78. 

Price, J.W., Anton, G., Arends, J., Beulertz, W., Bock, A., Breuer, M., Büchler, K., Clajus, M., Detemple, P., Hey, J., Krämer, D., Meyer, W., Nefkens, B.M.K., Nöldeke, G., Schneider, W., Zucht, B.
η meson photoproduction on hydrogen near threshold
(1995) Physical Review C, 51 (5), pp. R2283-R2287. 

Nizou, P.Y., Tida, T.
Heat and momentum transfer in plane turbulent wall jets [Transferts de chaleur et de quantité de mouvement dans les jets pariétaux plans turbulents]
(1995) International Journal of Heat and Mass Transfer, 38 (7), pp. 1187-1200. 

Vlad, G., Boiron, O., Le Palec, G., Bournot, P.
Numerical study of the compressible turbulent flow in a laser cavity
(1995) International Journal of Heat and Mass Transfer, 38 (14), pp. 2623-2633. 

Vlad, G., Boiron, O., Le Palec, G., Bournot, Philippe
Numerical study of the compressible turbulent flow in a laser cavity
(1995) Proceedings of SPIE - The International Society for Optical Engineering, 2502, pp. 565-570. 

Mazumdar, D., Guthrie, R.I.L.
On the numerical computation of turbulent fluid flow in CAS steelmaking operations
(1995) Applied Mathematical Modelling, 19 (9), pp. 519-524. 

Hadjerioua, Boualem, Eldredge, Tom V., Mobley, Mark H.
Reservoir oxygenation by oxygen diffusers
(1995) International Water Resources Engineering Conference - Proceedings, 2, pp. 1451-1455. 

Shelley, T.
Right tools speed better solutions
(1995) Eureka - Engineering Materials & Design, 15 (6), pp. 35-37. 

Veneri, R., Parodi, P., Glynn, D., Taylor, K.
CFD modelling on fire detection and suppression in a columbus rack
(1994) SAE Technical Papers, . 

McKinley, N.R., Kenny, R.G., Fleck, R.
CFD Prediction of a two-stroke, in-cylinder steady flow field an experimental validation
(1994) SAE Technical Papers, . 

Mawhinney, R.N., Galea, E.R., Hoffmann, N., Patel, M.K.
Critical comparison of a phoenics based fire field model with experimental compartment fire data
(1994) Journal of Fire Protection Engineering, 6 (4), pp. 137-152. 

Dargent, C., Dartus, D., George, J.
Numerical simulation of pulsating flow around a cube
(1994) International Conference on Air Pollution - Proceedings, 1, pp. 167-174. 

Pellon, Christopher, Papamichael, Haris, Miaoulis, Ioannis N.
Numerical simulation of the air flow patterns in an optical fiber drawing furnace
(1994) Proceedings of SPIE - The International Society for Optical Engineering, 2287, pp. 22-32. 

Nespor, V.
The wind effect on rain measurement: theoretical approach
(1994) Annalen der Meteorologie, 30, pp. 47-51. 

Youn, B., Yuen, C., Mills, A.F.
Friction factor for flow in rectangular ducts with one side rib-roughened
(1994) Journal of Fluids Engineering, Transactions of the ASME, 116 (3), pp. 488-493. 

Bui, R.T., Ouellet, R., Kocaefe, D.
A two-phase flow model of the stirring of Al-SiC composite melt
(1994) Metallurgical and Materials Transactions B, 25 (4), pp. 607-618. 

Büchler, K., Althoff, K.H., Anton, G., Arends, J., Beulertz, W., Breuer, M., Detemple, P., Dutz, H., Kohlgarth, E., Krämer, D., Meyer, W., Nöldeke, G., Schneider, W., Thiel, W., Zucht, B.
Photoproduction of positive pions from hydrogen with PHOENICS at ELSA
(1994) Nuclear Physics, Section A, 570 (3-4), pp. 580-598. 

Gopinath, A., Mills, A.F.
Convective heat transfer due to acoustic streaming across the ends of a Kundt tube
(1994) Journal of Heat Transfer, 116 (1), pp. 47-53. 

Sarkar, T., Sayer, P.G., Fraser, S.M.
Feasibility study of laminar flow bodies in fully turbulent flow
(1994) Proceedings of the International Offshore and Polar Engineering Conference, 2, pp. 607-615. 

Janssen, R.J.A., Bart, G.C.J., Cornelissen, M.C.M., Rabenberg, J.M.
Macrosegregation in continuously cast steel billets and blooms
(1994) Applied Scientific Research, 52 (1), pp. 21-35. 

Kravchik, T., Sher, E.
Numerical modeling of spark ignition and flame initiation in a quiescent methane-air mixture
(1994) Combustion and Flame, 99 (3-4), pp. 635-643. 

Ahmad, R.A.
Space transportation system launch pad summer environmental effects
(1994) Journal of thermophysics and heat transfer, 8 (1), pp. 75-83. 

Hughes, M., Pericleous, K.A., Cross, M.
The CFD analysis of simple parabolic and elliptic MHD flows
(1994) Applied Mathematical Modelling, 18 (3), pp. 150-155. 

Breen, Bernard P., Urich, Joseph A., Spalding, D.Brain, Smith, Bill L., Kramer, Edward D.
Development of a computer model for evaluation of NOx control alternatives
(1993) American Society of Mechanical Engineers, Fuels and Combustion Technologies Division (Publication) FACT, 17, pp. 109-113. 

van der Kooi, J., Wan, J.W.
Evaluation of air quality and thermal comfort in a coach
(1993) International Journal of Vehicle Design, 14 (5-6), pp. 530-538. 

Nam, Soonil
Numerical simulation of actual delivered density of sprinkler spray through fire plumes
(1993) American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 178, pp. 57-65. 

Frost, R.C., Halliday, J., Dee, A.S.
Continuous consolidation of sludge in large scale gravity thickeners
(1993) Water Science and Technology, 28 (1), pp. 77-86. 

Malvos, H., Ricard, A., Szekely, J., Michel, H., Gantois, M., Ablitzer, D.
Modelling of a microwave postdischarge nitriding reactor
(1993) Surface and Coatings Technology, 59 (1-3), pp. 59-66. 

Youn, B., Mills, A.F.
Flow of supercritical hydrogen in a uniformly heated circular tube
(1993) Numerical Heat Transfer; Part A: Applications, 24 (1), pp. 1-24. 

Norton, O.P., Skeggs, A., Bushijon, K.V.
Numerical flow simulation in the slagging stage of an MHD coal combustor
(1993) Magnitnaya Gidrodinamika, 29 (3), pp. 69-75. 

Anon
Software helps water separator design at Domnick Hunter
(1993) Filtration and Separation, 30 (2), p. 117. 

Software helps water separator design at domnick hunter
(1993) Filtration and Separation, 30 (2), p. 117. 

du Preez, A.F., Kröger, D.G.
Effect of wind on performance of a dry-cooling tower
(1993) Heat Recovery Systems and CHP, 13 (2), pp. 139-146. 

Fraser, Simon M., Yi, Zhang
Interface between experimental data and CFD simulated data
(1993) Proceedings of SPIE - The International Society for Optical Engineering, 2052, pp. 587-594. 

Fraser, S.M., Khater, R.
LDA measurements and CFD simulation of an annular impinging jet
(1993) Proceedings of SPIE - The International Society for Optical Engineering, 2052, pp. 579-586. 

Baskaya, S., Gilchrist, A., Fraser, S.M.
LDA measurements and numerical simulation of the induced flow through a rectangular chamber containing a vertical cylindrical heat source
(1993) Proceedings of SPIE - The International Society for Optical Engineering, 2052, pp. 571-578. 

Lobo, M., Elder, R.L.
Modeling of flow in the volute and vanes of a high pressure radial inflow turbine
(1993) American Society of Mechanical Engineers (Paper), pp. 1-12. 

Segatz, M., Vogelsang, D., Droste, C., Baekler, P.
Modelling of transient magneto-hydrodynamic phenomena in Hall-Heroult cells
(1993) Light Metals: Proceedings of Sessions, TMS Annual Meeting (Warrendale, Pennsylvania), pp. 361-368. 

Ouellet, R., Bui, R.T., Provencher, R., Bourgeois, T.
Modelling the stirring of Al-SiC composites
(1993) pp. 163-175. 

Nam, S., Bill Jr., R.G.
Numerical simulation of thermal plumes
(1993) Fire Safety Journal, 21 (3), pp. 231-256. 

Smith, T.
Software helps water separator design at domnick hunter
(1993) Filtration & Separation, 30 (2), p. 117. 

Narabayashi, Tadashi, Miyano, Hiroshi, Komita, Hideo, Iikura, Takahiko, Shiina, Koji, Kato, Hiroyuki, Watanabe, Akio, Takahashi, Yuji
Study on temperature fluctuation mechanisms in an annulus gap between PLR pump shaft and casing cover
(1993) Proceedings of the 2nd ASME-JSME Nuclear Engineering Joint Conference, pp. 207-213. 

Lobo, M., Elder, R.L.
The modelling of flow in the volute and vanes of a high pressure radial inflow turbine
(1993) ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition, GT 1993, 1, . 

Hulme, G., Curzon, A.F.
Analysis of fast reactor steam generator performance
(1992) Institution of Chemical Engineers Symposium Series, 1 (129), pp. 531-537. 

Ostberg, J., Johansson, N.
Mathematical modelling of flow patterns
(1992) pp. 153-164. 

Dartus, D., Le Guennec, B.
Numerical modelling of flow in a storage tank
(1992) pp. 201-208. 

Ratky, I.
Turbulence in the light of theory and practice [Turbulencia az elmelet es a gyakorlat tukreben]
(1992) Vizugyi Kozlemenyek (Budapest), 74 (4), pp. 399-417. 

Detemple, P., Althoff, K.H., Anton, G., Arends, J., Bock, A., Breuer, M., Büchler, K., Nöldeke, G., Serwazi, M., Schneider, W., Urban, D., Zucht, B.
The photon tagging system of the PHOENICS-experiment at ELSA
(1992) Nuclear Inst. and Methods in Physics Research, A, 321 (3), pp. 479-488. 

Schwarz, M.P.
Regional PHOENICS user conference. Melbourne, Australia, December 6, 1991
(1992) Minerals Engineering, 5 (6), p. 721. 

Haghighat, F., Jiang, Z., Wang, J.C.Y., Allard, F.
Air movement in buildings using computational fluid dynamics
(1992) Journal of Solar Energy Engineering, Transactions of the ASME, 114 (2), pp. 84-92. 

Ling, E.N., Metcalfe, E., Nadarajan, S., Patel, M.K.
A numerical simulation of the NBS cup furnace toxicity test
(1992) Fire Safety Journal, 19 (4), pp. 279-293. 

Kocaefe, Y.S., Simard, G., Bui, R.T., Charette, A., Potocnik, V., Perron, J.
Analyzing the heat transfer in a coke calcining kiln
(1992) Light Metals 1992, pp. 627-632. 

Richards, P.J., Hoxey, R.P.
Computational and wind tunnel modelling of mean wind loads on the Silsoe structures building
(1992) Journal of Wind Engineering and Industrial Aerodynamics, 43 (1-3), pp. 1641-1652. 

Nadarajah, A., Rosenberger, F., Alexander, J.I.D.
Effects of buoyancy-driven flow and thermal boundary conditions on physical vapor transport
(1992) Journal of Crystal Growth, 118 (1-2), pp. 49-59. 

Yavuz, T.
Effects of turbulence modellings on prediction of flow and heat transfer characteristics for confined jet impingement
(1992) DOGA, TURKISH JOURNAL OF ENGINEERING & ENVIRONMENTAL SCIENCES, 16 (3), pp. 177-192. 

Austin, P.R., Camplin, J.M., Herbertson, J., Taggart, I.J.
Mathematical modelling of thermal stratification and drainage of steel ladles
(1992) ISIJ International, 32 (2), pp. 196-202. 

Bhattacharyya, D., Richards, P.J., Somashekar, A.A.
Modelling of metal extrusion using the phoenics package
(1992) Journal of Materials Processing Tech., 35 (1), pp. 93-111. 

Schreiber, L., Legras, M.
Navier-stokes computation on a pivoting doors thrust reverser and comparison with tests
(1992) ASME 1992 International Gas Turbine and Aeroengine Congress and Exposition, GT 1992, 2, . 

Fagley Jr., John C.
Simulation of transport in laminar, tubular reactors and application to ethane pyrolysis
(1992) Industrial and Engineering Chemistry Research, 31 (1), pp. 58-69. 

Knowles, K., Bray, D.
Computation of normal impinging jets in cross-flow and comparison with experiment
(1991) International Journal for Numerical Methods in Fluids, 13 (10), pp. 1225-1233. 

Wan, J.W., van der Kooi, J.
Influence of the position of supply and exhaust openings on comfort in a passenger vehicle
(1991) International Journal of Vehicle Design, 12 (5-6), pp. 588-597. 

Neve, R.S., Gusbi, M.M.
Mathematical modelling of reservoir flows
(1991) Computer Methods in Water Resources II, pp. 261-275. 

Prakash, C., Zerkle, R.
Prediction of turbulent flow and heat transfer in a radially rotating square duct
(1991) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 188, pp. 1-13. 

Varnavas, C.A., Assanis, D.N.
The effects of spray, mixing, and combustion model parameters on KIVA-II predictions
(1991) SAE Technical Papers, . 

Chan, K.S., Pericleous, K., Cross, M.
Numerical simulation of flows encountered during mold-filling
(1991) Applied Mathematical Modelling, 15 (11-12), pp. 624-631. 

Arends, J., Breuer, M., Dahmen, H.D., Detemple, P., Schneider, W., Urban, D., Zucht, B.
Beam profile monitors for a tagged photon beam facility
(1991) Nuclear Inst. and Methods in Physics Research, A, 306 (1-2), pp. 89-92. 

Epple, B.
Dreidimensionale, turbulente Strömungs-und Mischungsgradberechnung mit dem PISO-Algorithmus
(1991) Forschung im Ingenieurwesen, 57 (4), pp. 105-112. 

Ahmad, R.A., Boraas, S.
External tank chill effect on the Space Transportation System launch pad environment
(1991) Journal of Spacecraft and Rockets, 28 (3), pp. 306-314. 

Overcamp, T.J., Agrawal, A.K., Cheng, W.-S., Yang, T.-T.
Calculations of fuel no formation in a gas turbine combustor
(1991) Proceedings of the ASME Turbo Expo, 3, . 

Overcamp, Thomas J., Agrawal, Ajay K., Cheng, Wei-Seng, Yang, Tah-Teh
Calculations of fuel NO formation in a gas turbine combustor
(1991) American Society of Mechanical Engineers (Paper), 8 p. 

Linton, Ronald L.
CFD modelling of electronic enclosures
(1991) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 171, pp. 95-100. 

Yang, Tah-Teh, Agrawal, Ajay K.
Comparative evaluation of combustion codes for low-btu gas applications
(1991) American Society of Mechanical Engineers (Paper), 8 p. 

Yang, T.-T., Agrawal, A.K.
Comparative evaluation of combustion codes for low-btu gas applications
(1991) Proceedings of the ASME Turbo Expo, 3, . 

Pressdee, B.
Computational fluid dynamics on your desktop
(1991) ENGINEERING DESIGNER, 17 (6), pp. 22-23. 

Jambunathan, K., Lai, E., Hartle, S.L., Button, B.L.
Development of an intelligent front end: An experience
(1991) Engineering Applications of Artificial Intelligence, 4 (5), pp. 385-392. 

Jambunathan, K., Lai, E., Hartle, S.L., Button, B.L.
Development of an intelligent front-end for a computational fluid dynamics package
(1991) Artificial Intelligence in Engineering, 6 (1), pp. 27-35. 

Wang, H., Touber, S.
Distributed and non-steady-state modelling of an air cooler
(1991) International Journal of Refrigeration, 14 (2), pp. 98-111. 

Schwarz, M.P.
Flow simulation in minerals engineering
(1991) Minerals Engineering, 4 (7-11), pp. 717-732. 

Pressdee, B.
Fluid dynamics: more power to the PC
(1991) PROCESS INDUSTRY J., 6 (6), pp. 47-49. 

Heat Transfer in Electronic Equipment - 1991
(1991) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 171, 143 p. 

Simon, Ralf, Huchler, Markus, Eickhoff, Jens
Modular fuel cell stack model in SIMTAS
(1991) Proceedings of the Intersociety Energy Conversion Engineering Conference, 3, pp. 533-537. 

Zughbi, H.D., Schwarz, M.P., Turner, W.J., Hutton, W.
Numerical and experimental investigations of wear in heavy medium cyclones
(1991) Minerals Engineering, 4 (3-4), pp. 245-262. 

Drake, S.N., Pericleous, K.A.
Numerical study of solar wall effects for the air movement and temperature distribution in the glass atrium of a building
(1991) Proceedings of the International Centre for Heat and Mass Transfer, pp. 577-587. 

Langsholt, M., Thomassen, D.
The computation of turbulent flow through pipe fittings and the decay of the disturbed flow in a downstream straight pipe
(1991) Flow Measurement and Instrumentation, 2 (1), pp. 45-55. 

Chen, Qingyan, Van Der Kooi, J.
Transient heat transfer through the enclosures of a room with mixed convection
(1991) Proceedings of the International Centre for Heat and Mass Transfer, pp. 697-706. 

Keski-Rahkonen, O., Eloranta, E., Huhtanen, R.
Use of numerical simulation computer codes to fire problems in nuclear power plants in Finland
(1991) Nuclear Engineering and Design, 125 (3), pp. 377-382. 

Hofacker, W., Huchler, M.
Analysis of the flow field in the HERMES cabin
(1990) SAE Technical Papers, . 

Spalding, Brian
Computer simulation of flow, heat transfer, and combustion
(1990) Proceedings of the International Centre for Heat and Mass Transfer, pp. 237-245. 

Fleming, J.S., Tramschek, A.B., Abdul-Husain, J.M.H., Piechna, J.
Efficient and flexible use of reciprocating compressors. A problem of valve aerodynamics
(1990) Proceedings of the International Centre for Heat and Mass Transfer, pp. 341-347. 

Ilegbusi, O.J., Szekely, J.
Modeling of gas-bubble driven circulations systems
(1990) ISIJ International, 30 (9), pp. 731-739. 

Agonafer, D., Chu, R.C.
Numerical methodology for analysis of card on board packages
(1990) American Society of Mechanical Engineers (Paper), 6 p. 

Svensson, U., Häggkvist, K.
A two-equation turbulence model for canopy flows
(1990) Journal of Wind Engineering and Industrial Aerodynamics, 35 (1-3), pp. 201-211. 

Türkoǧlu, H., Farouk, B.
Numerical computations of fluid flow and heat transfer in a gas-stirred liquid bath
(1990) Metallurgical Transactions B, 21 (4), pp. 771-781. 

Nadarajah, A., Rosenberger, F., Alexander, J.I.D.
Modelling the solution growth of TGS crystals in low gravity
(1990) Journal of Crystal Growth, 104 (2), pp. 218-232. 

Pressdee, Bill
CFD advances into engine technology
(1990) Automotive Engineer (London), 15 (1), 5 p. 

Bechteler, W., Sattel, H., Schatz, K., Tasdemir, A.
3D-flow field measurements around a cylinder in open channel flow compared with numerical models.
(1990). 

Chen, Q.
Comfort and energy consumption analysis in buildings with radiant panels
(1990) Energy and Buildings, 14 (4), pp. 287-297. 

Salinas, D., Cooper, E.E.
Gas turbine engine test cell modeling
(1990) American Society of Mechanical Engineers (Paper), pp. GT244 10p. 

Fraser, S.M., Carey, C., Kowaleski, G.
LDA measurements in submerged nozzle flow
(1990). 

Ruther, H., Parkyn, N.
Near real time photogrammetry on a personal computer
(1990) Photogrammetric Record, 13 (75), pp. 415-422. 

Fraser, S.M., Carey, C., Moustafa, A.A.A.
Numerical and experimental analysis of flow around isolated and shielded cubes
(1990) Applied Mathematical Modelling, 14 (11), pp. 588-597. 

Agonafer, D., Furkay, S.
Numerical and experimental investigation of heat transfer phenomena over an electronic module
(1990) Proceedings - IEEE Semiconductor Thermal and Temperature Measurement Symposium, p. 103. 

Esmaili, E., Bijlani, C., Shimura, K., Prasad, V., Minatsuki, I.
Analytical evaluation of natural convective cooling of nuclear reactor enclosure structure
(1989) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 123, pp. 185-192. 

Seppen, J.J., Janssen, G.A.H.F.
Development and verification of numerical flow package for manifolds in combustion engines
(1989) Proceedings of the International Centre for Heat and Mass Transfer, pp. 455-467. 

Heydarpour, Jalal, Slotta, Larry S.
Modeling erosion and deposition due to suction and jet flows
(1989) pp. 392-398. 

Flood, S.C., Katgerman, L., Langille, A.H., Rogers, S., Read, C.M.
Modelling of fluid flow and stress phenomena during DC casting of aluminium alloys
(1989) Light Metals: Proceedings of Sessions, AIME Annual Meeting (Warrendale, Pennsylvania), pp. 943-947. 

Potocnik, Vinko
Modelling of metal-bath interface waves in hall-heroult cells using ester/phoenics
(1989) Light Metals: Proceedings of Sessions, AIME Annual Meeting (Warrendale, Pennsylvania), pp. 227-235. 

Agonafer, D., Moffatt, D.F.
Numerical modeling of forced convection heat transfer for modules mounted on circuit boards
(1989) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 121, pp. 1-5. 

Crespo, A., Hernandez, J.
Numerical modelling of the flow field in a wind turbine wake
(1989) American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 76, pp. 121-127. 

Werner, C., Ulacia F., J.I., Howell, F.S.
Numerical simulation of gas flow and chemical reactions in semiconductor processing equipment
(1989) Digest of Technical Papers - Symposium on VLSI Technology, pp. 49-50. 

Toro B, Francisco M., Meijer, Karel, Van Rijn, Leo
Quasi-3D and fully -3D modelling of suspended sediment transport
(1989) pp. 45-51. 

Dunstall, M.
Rotorua geothermal field
(1989) Energy Digest, 18 (5), pp. 10-16. 

Irandoust, Said, Andersson, Bengt
Liquid film in Taylor flow through a capillary
(1989) Industrial and Engineering Chemistry Research, 28 (11), pp. 1684-1688. 

Pressdee, Bill
Software model for CZ
(1989) European Semiconductor, 11 (8), pp. 21-22. 

Jubran, B.A.
Correlation and prediction of film cooling from two rows of holes
(1989) Journal of Turbomachinery, 111 (4), pp. 502-509. 

Bourgeois, T., Bui, R.T., Charette, A., Kocaefe, Y.S.
Mathematical modeling of an aluminum casting furnace combustion chamber
(1989) Metallurgical Transactions B, 20 (3), pp. 421-429. 

Anon
Computer models fluid flow in the steel industry
(1989) Steel Times, 217 (4), p. 190. 

Anton, G., Büchler, K., Kückes, M.
A LED monitoring system for pulse height and time measurement with scintillation counters
(1989) Nuclear Inst. and Methods in Physics Research, A, 274 (1-2), pp. 222-226. 

Fleming, J.S., Tramschek, A.B., Abdul Husain, J.M.H.
A theoretical and experimental investigation of the flow of gas through reciprocating compressor valves.
(1989) pp. IMechE 1989-10. 

Fogelqvist, E., Krysell, M., Öhman, P.
Evaluation of perfluoromethyldecalin as a deliberate tracer for the study of water mixing processes
(1989) Marine Chemistry, 26 (4), pp. 339-349. 

Macilwain, C.
Keeping ahead of the flow.
(1989) ENGINEER, 268 (6938 , Mar. 16, 1989), pp. 36-37. 

Hoffman, N., Galea, E.R., Markatos, N.C.
Mathematical modelling of fire sprinkler systems
(1989) Applied Mathematical Modelling, 13 (5), pp. 298-306. 

Heydarpour, J., Slotta, L.S.
Modeling erosion and deposition due to suction and jet flows
(1989). 

Toro, F.M., Meijer, K., van Rijn, L.C.
Quasi-3D and fully-3D modelling of suspended sediment transport
(1989). 

Radosavljevic, D., Spalding, D.B.
Simultaneous prediction of internal and external aerodynamic and thermal flow fields of a natural-draft cooling tower in a cross-wind
(1989). 

Agonafer, D., Furkay, S.
Numerical and experimental investigation of heat transfer phenomena over an electronic module.
(1988) p. 85. 

Turkoglu, H., Farouk, B.
Numerical computations of fluid flow and heat transfer in a gas stirred liquid bath
(1988) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 96, pp. 133-139. 

Adey, P.C., Greaves, J.R.A.
The application of a 3-D aerodynamics model to the sterling 825 body shape and comparison with experimental data
(1988) SAE Technical Papers, . 

Militzer, J., Shiu, D.T., Watts, K.C.
Numerical prediction of the internal two-phase flow in a variable air atomizer
(1988) Journal of Engineering for Gas Turbines and Power, 110 (4), pp. 712-713. 

Qingyan, C., Van Der Kooi, J., Meyers, A.
Measurements and computations of ventilation efficiency and temperature efficiency in a ventilated room
(1988) Energy and Buildings, 12 (2), pp. 85-99. 

Pericleous, K.A.
Computer modelling for the analysis of fluid flow, heat transfer and combustion in industry
(1988) Energy World, (161), pp. 9-11. 

Tam, L.T., Przekwas, A.J., Muszynska, A., Hendricks, R.C., Braun, M.J., Mullen, R.L.
NUMERICAL AND ANALYTICAL STUDY OF FLUID DYNAMIC FORCES IN SEALS AND BEARING.
(1988) Journal of vibration, acoustics, stress, and reliability in design, 110 (3), pp. 315-325. 

Fleming, J.S., Tramschek, A.B., Abdul-Husain, J.M.H.
A comparison of flow and pressure distribution in simple valves using different computational methods.
(1988). 

Anderson, N.M.
A comparison of the computer programs FLOW3D, FLUENT/BFC and PHOENICS for solving fluid flow problems in complex geometries.
(1988). 

Uzel, A.R., Edwards, R.J., Button, B.L.
A study into the feasibility of an intelligent knowledge based system (IKBS) in computational fluid mechanics (CFM)
(1988) Engineering Applications of Artificial Intelligence, 1 (3), pp. 187-193. 

Rand, C.
CFD: how far has it got?
(1988). 

Ilegbusi, O.J., Szekely, J., Cartwright, R.A.
SOME ASYMPTOTIC AND COMPUTED RESULTS ON MAGNETICALLY DAMPED CZOCHRALSKI CRYSTAL GROWING SYSTEMS.
(1988) PCH. Physicochemical hydrodynamics, 10 (1), pp. 33-51. 

Hoffmann, N., Markatos, N.C.
Thermal radiation effects on fires in enclosures
(1988) Applied Mathematical Modelling, 12 (2), pp. 129-140. 

Tam, L.T., Przekwas, A.J., Muszynska, A., Hendricks, R.C., Braun, M.J., Mullen, R.L.
NUMERICAL AND ANALYTICAL STUDY OF FLUID DYNAMIC FORCES IN SEALS AND BEARINGS.
(1987) American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 2 (pt 2), pp. 359-370. 

Brown, G.A., Cheng, C.-Y., Borgia, J.A., Conti, K.A., Rosenthal, E., Sarkar, K., Eichenbaum, S.
Pressure drop and flow characteristics for clean heavy-duty air cleaner
(1987) SAE Technical Papers, . 

Coleman, Michael, Sammakia, Bahgat G., Agonafer, Dereje
UNSTEADY BUOYANCY INDUCED FLOW IN AN ENCLOSURE.
(1987) American Society of Mechanical Engineers (Paper), 10 p. 

Anon
FLOW MODELLING OVER TWIN-NOZZLE AFTERBODIES USING PHOENICS.
(1987) Aircraft Engineering and Aerospace Technology, 59 (5), pp. 2-4, 6. 

Davidson, L., Olsson, E.
Calculation of age and local purging flow rate in rooms
(1987) Building and Environment, 22 (2), pp. 111-127. 

Lofdal, L.
Flow measurements in a radial fan and other turbomachinery bladings using hot-wires. Cascade flow using PHOENICS.
(1987). 

Hydraulic analysis of pipeline systems.
(1987) HYDRO DELFT, (75 , Apr. 1987), pp. 5-6. 

Wahnsiedler, W.E.
HYDRODYNAMIC MODELING OF COMMERCIAL HALL-HEROULT CELLS.
(1987) Light Metals: Proceedings of Sessions, AIME Annual Meeting (Warrendale, Pennsylvania), pp. 26-287. 

Baldwin, S.J., White, P.R.S., Al-Daini, A.J., Davenport, C.J.
Investigation of the gas side flow field in multilouvred ducts with flow reversal.
(1987). 

Ilegbusi, O.J., Szekely, J.
MELT STRATIFICATION IN LADLES.
(1987) Transactions of the Iron and Steel Institute of Japan, 27 (7), pp. 563-569. 

Spalding, D.B., Villasenor, F.
NUMERICAL SIMULATION OF KELVIN-HELMHOLTZ INSTABILITY IN A STRATIFIED SHEAR FLOW.
(1987) PCH. Physicochemical hydrodynamics, 9 (1-2), pp. 379-386. 

Grant, A.D., Moustafa, A.A., Reeves, P.
Prediction of wind loading on structures.
(1987). 

Pericleous, K.A., Patel, M.K.
SOURCE-SINK APPROACH IN THE MODELLING OF STIRRED REACTORS.
(1987) PCH. Physicochemical hydrodynamics, 9 (1-2), pp. 279-297. 

Lowry, S.A., Keeton, L.W.
Space shuttle main engine high pressure fuel pump aft platform seal cavity flow analysis.
(1987). 

Lowry, S.A., Keeton, L.W.
SPACE SHUTTLE MAIN ENGINE HIGH PRESSURE FUEL PUMP AFT PLATFORM SEAL CAVITY FLOW ANALYSIS.
(1987) NASA Technical Paper, 137 p. 

Lowry, S.A., Keeton, L.W.
Space shuttle main engine high pressure fuel pump aft platform seal cavity flow analysis.
(1987). 

Hutchings, B., Iannuzzelli, R.
Taking the measure of fluid dynamics software.
(1987) MECH. ENGNG., 109 (5 , May 1987), pp. 72-76. 

Rawnsley, S.M., Tatchell, D.G.
Application of the phoemics code to the computation of the flow around automobiles
(1986) SAE Technical Papers, . 

Schwarz, M.P., Koh, P.T.L.
NUMERICAL MODELLING OF BATH MIXING BY SWIRLED GAS INJECTION.
(1986) pp. 6. 1-6. 17. 

Militzer, J.
NUMERICAL PREDICTION OF THE FULLY DEVELOPED TWO-PHASE (AIR-SOLIDS) FLOW IN A PIPE.
(1986) pp. 173-183. 

Spalding, D.B., Wu, J.Z.Y.
NUMERICAL STUDIES OF PROPAGATING FLAMES EXHIBITING THE LANDAU AND RAYLEIGH-TAYLOR INSTABILITIES.
(1986) PCH. Physicochemical hydrodynamics, 7 (5-6), pp. 353-384. 

Mes, H., Van Essen, D., Kirkcaldy, D., Phelps, P.J.
PHOENICS CODE THERMAL HYDRAULIC ANALYSIS OF A PROTOTYPE LMFBR STRAIGHT TUBE STEAM GENERATOR.
(1986) American Society of Mechanical Engineers (Paper), 7 p. 

Leefe, S.E., Tansley, G.D., Gentle, C.R.
PULSATILE FLOW TESTING OF PROSTHETIC HEART VALVE CONDUITS.
(1986) pp. 15-19. 

Singhal, A.K., Tam, L.T., Bachtel, F., Vaniman, J.
THERMAL ENVIRONMENT AROUND THE SPACE SHUTTLE WITH HOT-GAS JETS FOR ICE SUPPRESSION.
(1986) Journal of Spacecraft and Rockets, 23 (6), pp. 547-553. 

McConnell, P.M., Owens, S.F., Kamin, R.A.
PREDICTION OF FUEL FREEZING IN AIRPLANE FUEL TANKS OF ARBITRARY GEOMETRY - PART 1.
(1986) Aircraft Engineering and Aerospace Technology, 58 (9), pp. 20-23. 

Rhodes, Norman
STREAMLINED SOLUTIONS TO FLUID FLOW PROBLEMS.
(1986) CME. Chartered mechanical engineer, 33 (4), pp. 56-57. 

Han, S.H., Bankoff, S.G.
An unsteady one-dimensional two-fluid model for fuel-coolant mixing in an LWR meltdown accident
(1986) Nuclear Engineering and Design, 95 (C), pp. 285-295. 

Rawnsley, S.M.
Application of the PHOENICS code to the computation of the flow around automobiles.
(1986). 

Langsholt, M., Thomassen, D.
Computer modelling of fluid flow through orifices.
(1986) IN: FM 80'S, FLOW MEASUREMENT IN THE MID 80'S INT. CONF., (EAST KILBRIDE, U.K.: JUN. 9-12, 1986), 2 , East Kilbride, U.K., Nat. Engng. Lab., 1986, Session 7, Paper 7.2, 16 p. 

van Essen, D.
EXPERIMENTAL RESULTS OF THE 85 MWTH SNR-300 INTERMEDIATE HEAT EXCHANGER.
(1985) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 51, pp. 1-7. 

Ilegbusi, J.O., Spalding, D.B.
NUMERICAL CALCULATION OF THE COLD-FLOW CHARACTERISTICS OF A BLUFF-BODY FLAME STABILIZER.
(1985) Modelling, simulation & control. B, 4 (1), pp. 31-49. 

Kirkcaldy, D., Phelps, P.J., van Essen, D.
PHOENICS CODE THERMAL HYDRAULIC ANALYSIS OF THE SNR-300 IHX.
(1985) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 51, pp. 9-16. 

THERMAL HYDRAULICS AND EFFECTS OF NUCLEAR STEAM GENERATORS AND HEAT EXCHANGERS.
(1985) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 51, 120 p. 

THERMAL HYDRAULICS AND EFFECTS OF NUCLEAR STEAM GENERATORS AND HEAT EXCHANGERS.
(1985) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 51, 120 p. 

Rhodes, N., Al-Sanea, S.A., Pericleous, K.A.
USE OF THE FLUID FLOW PROGRAM PHOENICS IN ENGINEERING DESIGN.
(1985) pp. 15. 93-15. 105. 

Anon
RESEARCH. AERODYNAMIC FLOW SIMULATION AND BLUFF BODY DESIGN.
(1985) Automotive Engineer (London), 10 (5), pp. 88-89. 

Kjaldman, Lars, Huhtanen, Risto
SIMULATION OF FLAME ACCELERATION IN UNCONFINED VAPOUR CLOUD EXPLOSIONS.
(1985) Valtion Teknillinen Tutkimuskeskus, Tutkimuksia, 53 p. 

Johnson, Allen E., Torok, Dennis
SOFTWARE FOR FLUID FLOW AND HEAT TRANSFER ANALYSES OF ELECTRONIC PACKAGING.
(1985) CIME. Computers in mechanical engineering, 4 (1), pp. 41-46. 

Nallasamy, M.
Critical evaluation of various turbulent models as applied to internal fluid flows.
(1985). 

Singhal, CHAM of North America Inc, Huntsville
CRITICAL LOOK AT THE PROGRESS IN NUMERICAL HEAT TRANSFER AND SOME SUGGESTIONS FOR IMPROVEMENT.
(1985) Numerical heat transfer, 8 (5), pp. 505-517. 

Nallasamy, M., Chen, C.P.
Studies on effects of boundary conditions in confined turbulent flow predictions.
(1985). 

Mukerjee, T., Singhal, A.K.
ANALYSIS OF FLOW DEVELOPMENT IN OPEN COMBUSTION CAVITIES OF DIESEL ENGINES.
(1984) American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 20, pp. 19-25. 

Singhal, A.K., Owens, S.F., Mukerjee, T., Keeton, L.W., Prakash, C.
Analysis of physical-chemical processes governing SSME internal fluid flows.
(1984). 

Andrews, M.J.
Application of the van Leer method to the solution of one-dimensional volume fraction equations.
(1984). 

Jun, L.
Laminar flow in a driven square cavity.
(1984). 

Spalding, D.Brian, Tatchell, David G.
GENERAL-PURPOSE FLUID-MECHANICS COMPUTER PROGRAM FOR TURBOMACHINERY APPLICATIONS.
(1983) International Congress on Combustion Engines, pp. 361-388. 

Rosten, H.I., Spalding, D.B., Tatchell, D.G.
PHOENICS: A GENERAL-PURPOSE PROGRAM FOR FLUID-FLOW, HEAT-TRANSFER AND CHEMICAL-REACTION PROCESSES.
(1983) pp. 639-655. 

Markatos, N.C., Pericleous, C.A.
GRAFFIC: A computer package for the interactive graphical representation of fluid-flow phenomena
(1983) Advances in Engineering Software (1978), 5 (2), pp. 86-91. 

Rosten, H.I., Spalding, D.B., Tatchell, D.G.
PHOENICS: a general-purpose program for fluid-flow, heat-transfer and chemical-reaction processes.
(1983). 

Moscardini, A.O.
PHOENICS - PARABOLIC, HYPERBOLIC OR ELLIPTICAL INTEGRATION CODE SERIES.
(1982) Proceedings of Polymodel, pp. 242-260. 

Malin, M.R.
TURBULENT, AXISYMMETRIC WAKE BEHIND A LOW-DRAG BODY OF REVOLUTION.
(1982) PCH. Physicochemical hydrodynamics, 3 (3-4), pp. 171-198. 

Anon
COMPUTER MODELING OF FLUID FLOW AND HEAT TRANSFER PROCESSES.
(1982) Mechanical Engineering, 104 (3), pp. 38-39. 

Markatos, N.C., Rhodes, N., Tatchell, D.G.
A general purpose program for the analysis of fluid flow problems.
(1982). 

Schmidt, W., Buchheim, R.
Evaluation of different approaches in computational aerodynamics for passenger cars.
(1982). 

Spalding, D.B.
A general purpose computer program for multi-dimensional one- and two-phase flow
(1981) Mathematics and Computers in Simulation, 23 (3), pp. 267-276. 

Abdelmaguid, A.M., Goh, S.Y., Ilegbusi, J., Spalding, D.B.
Predictions of complex turbulent flows using the phoenics computer code.
(1981). 

Spalding, D.B.
Solution of the parabolized Navier-Stokes equations.

Carey, C., Fraser, S.M., McKeogh, E.J.
Comparison of LDA measurements with 3-D computer analysis of flow in a containing vessel.

Carey, I.C., Fraser, S.M., McKeogh, E.J.
Comparison of LDA measurements with 3-D computer analysis of flow in a containing vessel.

Spalding, D.B.
Numerical requirements of two-phase prediction procedures.
AICHE SYMP. SER., 79 (225 , 1983, p.414-419.). 

Malin, M.R.
The turbulent, axisymmetric wake behind a low-drag body of revolution.
PHYSICOCHEM. HYDRODYN., 3 (3-4 , 1982), pp. 171-198. 

 

Here is another list of PHOENICS Publications from 1981 to 2003

More Publications